On Sun, 26 Jul 2009 22:00:22 -0400, "Eisboch"
wrote:


"J i m" wrote in message
...
Wizard of Woodstock wrote:
A friend on mine just bought a used Stratos 20' bass boat with a 250
Yamaha Vmax. He called this afternoon and asked me to take a ride
with him because he couldn't get his boat to plane right.

We met up at Webster Lake and took it for a ride after checking
everything over - everything seemed to be working, nothing out of
sorts with the hull.

Got on the water and it's the oddest thing - no matter what trim
position, the boat would porpise (pitch) at speed. Vary the speed and
you'd get a yawing action - trim made no difference. No roll to speak
of.

All the bolts are tight, properly torgued, the prop is symmetrical,
the skeg on the outboard is straight, keel is straight - no obvious
repairs.

Any ideas? I'll admit it - I'm stumped.

Try putting 100 pounds of weight at the bow and see if that helps.

I had a Robalo that handled like that. No matter how I trimmed it, it
porpised and chine walked in turns. I mentioned it to a guy at work who
took it and adjusted the mounting height of the engine on the transom. All
the porposing and other squirrely handling symptoms disappeared.

Yeah - that was a thought. My own experience with jack plates would
seem to indicate that it would help more than hurt.

And as it happens, I have a mechanical jack plate sitting in the
garage.