On Fri, 5 Jun 2009 10:52:08 -0700, "Mike" wrote:


Fascinating! Thanks for the info. Is your septic tank ready to be pumped
again? Please let us know when you do it. Pictures would be appreciated.

That'd be a job for Dan "Silly ****" Krueger.

On Jun 5, 2:58*pm, jps wrote:
On Fri, 05 Jun 2009 12:35:46 -0400, "Reginald P. Smithers III, Esq."





wrote:
HK wrote:
Wizard of Woodstock wrote:
On Fri, 05 Jun 2009 11:19:30 -0400, jim7 wrote:

BTW a 3 blade mower seems a bit overkill for the less than 1/4 acre
you have to mow.

For $12?

Four bucks a piece?

BBBBAAAWWWAAAHHHHHAAAAA!!!!!

That's really amusing.

Yup. Bought them last year way out in Virginia at a big farm equipment
store. Three blades, with an $11 and change sticker on them. Maybe it
should have been $11 each, but I was charged under $12. Standard issue
from Husky, too...not OEM.

When I lived in Eastern Maryland, I *would always go *to Virginia to buy
my mower blades, doesn't everyone?

He didn't say he went to Virginia to buy the blades, moron.

You silly ****, sure he did. Got readin'?

"jps" wrote in message
...
On Fri, 05 Jun 2009 14:10:19 -0400, HK wrote:


Valvoline...5.5 quart jug. If you bring a note from mommy with you,
autozone would sell you one. You could use it to lube up the bottom of
that wide stance boat of yours.

Is that a pontoon boat by chance? WTF are those things good for?


Drunken parties for old farts that should know better.

On Fri, 5 Jun 2009 08:58:20 -0700 (PDT), wrote:

On Jun 5, 11:43*am, Wizard of Woodstock wrote:
On Fri, 05 Jun 2009 11:19:30 -0400, jim7 wrote:
BTW a 3 blade mower seems a bit overkill for the less than 1/4 acre you
have to mow.

For $12?

Four bucks a piece?

BBBBAAAWWWAAAHHHHHAAAAA!!!!!

That's really amusing.

True... you couldn't get them sharpened for 12 bucks!

Honest to pete - Huskie doesn't make a three blade deck under 48" and
never has. To get a 48" deck, it has to be a minimum 25hp - mine's a
25 horse, 48" deck, hydro drive and it's just barely sufficient for
the three acres of lawn I have to mow - it ain't no "small" lawn
tractor either.

I get dealer cost on my blades and they are $36 a three pack from
Huskie.

There isn't a farm dealer in the world who's going to make that kind
of mistake selling mower blades.

jps wrote:
On Fri, 05 Jun 2009 14:10:19 -0400, HK wrote:


Valvoline...5.5 quart jug. If you bring a note from mommy with you,
autozone would sell you one. You could use it to lube up the bottom of
that wide stance boat of yours.

Is that a pontoon boat by chance? WTF are those things good for?


Poon has a tri-toon, which, I suppose, has an even wider stance than a
pontoon. There's a fellow at a nearby marina with one...his son is in a
wheelchair and I suppose the "flattop" aspect of the boat makes it
possible for the kid to enjoy the water.

wrote:
On Jun 5, 2:58 pm, jps wrote:
On Fri, 05 Jun 2009 12:35:46 -0400, "Reginald P. Smithers III, Esq."





wrote:
HK wrote:
Wizard of Woodstock wrote:
On Fri, 05 Jun 2009 11:19:30 -0400, jim7 wrote:
BTW a 3 blade mower seems a bit overkill for the less than 1/4 acre
you have to mow.
For $12?
Four bucks a piece?
BBBBAAAWWWAAAHHHHHAAAAA!!!!!
That's really amusing.
Yup. Bought them last year way out in Virginia at a big farm equipment
store. Three blades, with an $11 and change sticker on them. Maybe it
should have been $11 each, but I was charged under $12. Standard issue
from Husky, too...not OEM.
When I lived in Eastern Maryland, I would always go to Virginia to buy
my mower blades, doesn't everyone?
He didn't say he went to Virginia to buy the blades, moron.

You silly ****, sure he did. Got readin'?


No, ****-for-brains, I happened to buy them *when* we were out in Luray.
We didn't drive to Luray for garden tractor parts.

Wizard of Woodstock wrote:
On Fri, 5 Jun 2009 08:58:20 -0700 (PDT), wrote:

On Jun 5, 11:43 am, Wizard of Woodstock wrote:
On Fri, 05 Jun 2009 11:19:30 -0400, jim7 wrote:
BTW a 3 blade mower seems a bit overkill for the less than 1/4 acre you
have to mow.
For $12?

Four bucks a piece?

BBBBAAAWWWAAAHHHHHAAAAA!!!!!

That's really amusing.
True... you couldn't get them sharpened for 12 bucks!

Honest to pete - Huskie doesn't make a three blade deck under 48" and
never has. To get a 48" deck, it has to be a minimum 25hp - mine's a
25 horse, 48" deck, hydro drive and it's just barely sufficient for
the three acres of lawn I have to mow - it ain't no "small" lawn
tractor either.

I get dealer cost on my blades and they are $36 a three pack from
Huskie.

There isn't a farm dealer in the world who's going to make that kind
of mistake selling mower blades.



"Huskie doesn't make a three blade deck under 48" and never has. To get
a 48" deck, it has to be a minimum 25hp..." SWTom


Honest to pete, Tom...you are full of ****.

I have a Husqvarna garden tractor with a 48" deck with three blades.

http://www.ronanpowerproducts.com/ne...anufacturer=40

I love it when you righties work so hard to make fools of yourselves.

HK wrote:
wrote:
On Jun 5, 2:58 pm, jps wrote:
On Fri, 05 Jun 2009 12:35:46 -0400, "Reginald P. Smithers III, Esq."





wrote:
HK wrote:
Wizard of Woodstock wrote:
On Fri, 05 Jun 2009 11:19:30 -0400, jim7 wrote:
BTW a 3 blade mower seems a bit overkill for the less than 1/4 acre
you have to mow.
For $12?
Four bucks a piece?
BBBBAAAWWWAAAHHHHHAAAAA!!!!!
That's really amusing.
Yup. Bought them last year way out in Virginia at a big farm equipment
store. Three blades, with an $11 and change sticker on them. Maybe it
should have been $11 each, but I was charged under $12. Standard issue
from Husky, too...not OEM.
When I lived in Eastern Maryland, I would always go to Virginia to
buy
my mower blades, doesn't everyone?
He didn't say he went to Virginia to buy the blades, moron.

You silly ****, sure he did. Got readin'?


No, ****-for-brains, I happened to buy them *when* we were out in Luray.
We didn't drive to Luray for garden tractor parts.

Where is luray anyway? Pennsylvania?

HK wrote:
Wizard of Woodstock wrote:
On Fri, 5 Jun 2009 08:58:20 -0700 (PDT), wrote:

On Jun 5, 11:43 am, Wizard of Woodstock wrote:
On Fri, 05 Jun 2009 11:19:30 -0400, jim7 wrote:
BTW a 3 blade mower seems a bit overkill for the less than 1/4 acre
you
have to mow.
For $12?

Four bucks a piece?

BBBBAAAWWWAAAHHHHHAAAAA!!!!!

That's really amusing.
True... you couldn't get them sharpened for 12 bucks!

Honest to pete - Huskie doesn't make a three blade deck under 48" and
never has. To get a 48" deck, it has to be a minimum 25hp - mine's a
25 horse, 48" deck, hydro drive and it's just barely sufficient for
the three acres of lawn I have to mow - it ain't no "small" lawn
tractor either.

I get dealer cost on my blades and they are $36 a three pack from
Huskie.

There isn't a farm dealer in the world who's going to make that kind
of mistake selling mower blades.



"Huskie doesn't make a three blade deck under 48" and never has. To get
a 48" deck, it has to be a minimum 25hp..." SWTom


Honest to pete, Tom...you are full of ****.

I have a Husqvarna garden tractor with a 48" deck with three blades.

http://www.ronanpowerproducts.com/ne...anufacturer=40


I love it when you righties work so hard to make fools of yourselves.

A garden tractor and no garden. You got one hell of a lawnmower for your
1/4 acre of grass.

"HK" wrote in message
m...
Wizard of Woodstock wrote:
On Fri, 5 Jun 2009 08:58:20 -0700 (PDT), wrote:

On Jun 5, 11:43 am, Wizard of Woodstock wrote:
On Fri, 05 Jun 2009 11:19:30 -0400, jim7 wrote:
BTW a 3 blade mower seems a bit overkill for the less than 1/4 acre
you
have to mow.
For $12?

Four bucks a piece?

BBBBAAAWWWAAAHHHHHAAAAA!!!!!

That's really amusing.
True... you couldn't get them sharpened for 12 bucks!

Honest to pete - Huskie doesn't make a three blade deck under 48" and
never has. To get a 48" deck, it has to be a minimum 25hp - mine's a
25 horse, 48" deck, hydro drive and it's just barely sufficient for
the three acres of lawn I have to mow - it ain't no "small" lawn
tractor either.

I get dealer cost on my blades and they are $36 a three pack from
Huskie.

There isn't a farm dealer in the world who's going to make that kind
of mistake selling mower blades.



"Huskie doesn't make a three blade deck under 48" and never has. To get a
48" deck, it has to be a minimum 25hp..." SWTom


Honest to pete, Tom...you are full of ****.

I have a Husqvarna garden tractor with a 48" deck with three blades.

http://www.ronanpowerproducts.com/ne...anufacturer=40

I love it when you righties work so hard to make fools of yourselves.

And you lefties don't have to work hard at it at all! LMAO

--Mike