Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: May 2009
Posts: 826
Default gps


wrote in message
...
On May 22, 2:07 am, "Calif Bill" wrote:
"Eisboch" wrote in message

...





"Calif Bill" wrote in message
...


Funniest event during school at Keesler was during a TACAN class. We
ran
the units on Low Power. Only 3000 volts on the tubes. About 3kw dummy
load. We had a Vietnamese MAP student in the class. Had absolutely no
common sense when it came to electricity! When you needed to work on
the
unit, you turned the dial on the front of the drawer to zero. Open the
drawer and use a shorting bar to make sure all the caps are discharged.
The kid did not bother turning down the power, and opened the drawer
and
proceeded to touch the shorting bar everywhere. Sparks bouncing off the
12' ceiling and he never realized something was wrong or even
different.
The instructor was in shock, the rest of us were in hysterics.


I have been just as stupid. While on a mid-watch at a Navy transmitter
site in Puerto Rico, I was working on an old AN/FRT-40 HF transmitter.
Shut the thing down, opened the rear door to the power supply section
and
then was interrupted by a phone call or something. When I returned to
the
transmitter, I hit my hand against a connection to one of the huge power
supply filter capacitors and discharged it through me. The muscle
contractions caused me to fly backwards about 7 feet back and about 4
feet
up against the building wall and for several minutes all I saw were
stars.


I was lucky. That was my first high voltage, high current experience.
Had another later as a civilian that was worse.
Knocked me out cold and was rushed to the emergency room. Fortunately,
no permanent injury other than some bad burns on my hands.


Eisboch


My episode was checking the voltage on an airborne radar unit out of a
probably C-141. Do not remember the model number anymore. 400 VDC and a
meter lead unlike any I have ever seen before or sense. Had an extra ring
on the insulated part that was hot to the probe. About 20' later I get up
off the floor. Having missed every workbench and stand in the area. My
muscles hurt for at least 3 days afterwards.


Kinda like tricking some fool into ****ing on an Electric Fence.

Hurt much worse than touching an electric fence. Was smart enough to not
**** on one.


  #2   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: May 2009
Posts: 130
Default gps

Calif Bill wrote:
wrote in message
...
On May 22, 2:07 am, "Calif Bill" wrote:
"Eisboch" wrote in message

...





"Calif Bill" wrote in message
...
Funniest event during school at Keesler was during a TACAN class. We
ran
the units on Low Power. Only 3000 volts on the tubes. About 3kw dummy
load. We had a Vietnamese MAP student in the class. Had absolutely no
common sense when it came to electricity! When you needed to work on
the
unit, you turned the dial on the front of the drawer to zero. Open the
drawer and use a shorting bar to make sure all the caps are discharged.
The kid did not bother turning down the power, and opened the drawer
and
proceeded to touch the shorting bar everywhere. Sparks bouncing off the
12' ceiling and he never realized something was wrong or even
different.
The instructor was in shock, the rest of us were in hysterics.
I have been just as stupid. While on a mid-watch at a Navy transmitter
site in Puerto Rico, I was working on an old AN/FRT-40 HF transmitter.
Shut the thing down, opened the rear door to the power supply section
and
then was interrupted by a phone call or something. When I returned to
the
transmitter, I hit my hand against a connection to one of the huge power
supply filter capacitors and discharged it through me. The muscle
contractions caused me to fly backwards about 7 feet back and about 4
feet
up against the building wall and for several minutes all I saw were
stars.
I was lucky. That was my first high voltage, high current experience.
Had another later as a civilian that was worse.
Knocked me out cold and was rushed to the emergency room. Fortunately,
no permanent injury other than some bad burns on my hands.
Eisboch

My episode was checking the voltage on an airborne radar unit out of a
probably C-141. Do not remember the model number anymore. 400 VDC and a
meter lead unlike any I have ever seen before or sense. Had an extra ring
on the insulated part that was hot to the probe. About 20' later I get up
off the floor. Having missed every workbench and stand in the area. My
muscles hurt for at least 3 days afterwards.


Kinda like tricking some fool into ****ing on an Electric Fence.

Hurt much worse than touching an electric fence. Was smart enough to not
**** on one.



Actually you will not get shocked, unless you are ****ing within inches
of the fence. Your urine stream will separate into droplets, not a
solid stream, very soon after it leaves the hose. How do I know? One
word.... Mythbusters.

--
Reginald P. Smithers III, Esq.

This Newsgroup post is a natural product. The slight variations in
spelling and grammar enhance its individual character and beauty and in
no way are to be considered flaws or defects
  #3   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: May 2009
Posts: 826
Default gps


"Reginald P. Smithers III, Esq." wrote in message
...
Calif Bill wrote:
wrote in message
...
On May 22, 2:07 am, "Calif Bill" wrote:
"Eisboch" wrote in message

...





"Calif Bill" wrote in message
...
Funniest event during school at Keesler was during a TACAN class. We
ran
the units on Low Power. Only 3000 volts on the tubes. About 3kw dummy
load. We had a Vietnamese MAP student in the class. Had absolutely no
common sense when it came to electricity! When you needed to work on
the
unit, you turned the dial on the front of the drawer to zero. Open the
drawer and use a shorting bar to make sure all the caps are
discharged.
The kid did not bother turning down the power, and opened the drawer
and
proceeded to touch the shorting bar everywhere. Sparks bouncing off
the
12' ceiling and he never realized something was wrong or even
different.
The instructor was in shock, the rest of us were in hysterics.
I have been just as stupid. While on a mid-watch at a Navy transmitter
site in Puerto Rico, I was working on an old AN/FRT-40 HF transmitter.
Shut the thing down, opened the rear door to the power supply section
and
then was interrupted by a phone call or something. When I returned to
the
transmitter, I hit my hand against a connection to one of the huge
power
supply filter capacitors and discharged it through me. The muscle
contractions caused me to fly backwards about 7 feet back and about 4
feet
up against the building wall and for several minutes all I saw were
stars.
I was lucky. That was my first high voltage, high current experience.
Had another later as a civilian that was worse.
Knocked me out cold and was rushed to the emergency room. Fortunately,
no permanent injury other than some bad burns on my hands.
Eisboch
My episode was checking the voltage on an airborne radar unit out of a
probably C-141. Do not remember the model number anymore. 400 VDC and a
meter lead unlike any I have ever seen before or sense. Had an extra
ring
on the insulated part that was hot to the probe. About 20' later I get
up
off the floor. Having missed every workbench and stand in the area. My
muscles hurt for at least 3 days afterwards.


Kinda like tricking some fool into ****ing on an Electric Fence.

Hurt much worse than touching an electric fence. Was smart enough to not
**** on one.


Actually you will not get shocked, unless you are ****ing within inches of
the fence. Your urine stream will separate into droplets, not a solid
stream, very soon after it leaves the hose. How do I know? One
word.... Mythbusters.

--
Reginald P. Smithers III, Esq.

This Newsgroup post is a natural product. The slight variations in
spelling and grammar enhance its individual character and beauty and in no
way are to be considered flaws or defects


Guy I worked with from the Dallas area stated one of the kids in his high
school class on a field trip to see some hybrid corn did **** on the
electric fence. Thought it was off. Could not **** for a couple days.


  #4   Report Post  
posted to rec.boats
external usenet poster
 
First recorded activity by BoatBanter: May 2007
Posts: 2,587
Default gps

On Fri, 22 May 2009 13:12:00 -0700, "Calif Bill"
wrote:

Kinda like tricking some fool into ****ing on an Electric Fence.

Hurt much worse than touching an electric fence. Was smart enough to not
**** on one.


Of course the so called stream is a string of separate droplets. Non
conductive.

Casady
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT +1. The time now is 05:47 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017