"Dave Brown" wrote in message
news:Tt2dnWokC9FTiD_UnZ2dnUVZ_giWnZ2d@wtccommunica tions.ca...
Mike wrote:

By all means, bring your own mechanic. If the dealer objects, then move
on and look for a boat elsewhere. Insist on a sea trial if at all
possible.

I never mind when someone brings a qualified mechanic, what I see more of
is bringing a friend who claims to know something about boats, who
proceeds to try and show off in front of the person that brought him to
make it looks like he knows something. It's a no win situation for me
because if the tag-along says something is wrong and I claim otherwise, I
look like I'm covering up when it's just that he doesn't know what he's
talking about.

I have been hired many times to look over a boat for someone who was about
to purchase from a private seller and it was the best investment they
could make.

--
Regards,
Dave Brown
Brown's Marina Ltd
http://brownsmarina.com/

Hi Dave,

I couldn't agree more. He said mechanic, but I suppose it could have been a
lawn mower mechanic. ;-) I should have qualified my response.

Thanks for chiming in.

--Mike

On Sun, 22 Feb 2009 18:34:36 -0800 (PST), P
wrote:

I have a source for natural gas, but it's unlikely to be usable in the
rotax's. Or anywere.

It is the gasoline usually produced along with the gas. I remember my
uncle taking the five gal cans out of the trunk and filling them.There
was a length of 1/4 inch copper tubing with a valve in it, coming out
of the nest of pipe at the wellhead. Thay call this casinghead
gasoline.

Casady

Thanks all. Two questions;

When Wayne says the Rotax engines are not known for their longevity -
how do I (or my mechanic) screen for that? I guess one thing would be
the hours meter - one for each engine/where? I'm told the servicing
history is available - anything special to look for?

In addition to the usual splashing around/water skiing, I'd like to do
a bit of trolling on lake ontario - other then a bad directional
problem at this slow speed with a jet boat (not the end of the world
in a huge lake) are there any gotcha's here? Again - the sole reason
for this type of boat is that it fits in my garage - I realize
trolling in a jet boat is unusual.

The boat itself can be seen here;

http://www.boatcan.com/showboat.php?ad=1136942651

On Sun, 22 Feb 2009 17:00:12 -0800, "Mike" wrote:

the well produced lots
of natural gas and some gasoline, pentane distills out at 98F.

I did not know that! Interesting.

The newer jetboats are much more fuel efficient than in the past. I'd still
like to gace a gasoline well though g.

Is Turbocraft hull number ten in the past enough. Tenth jet boat in
the US, fifty years ago. Still have it. It went a bit over thirty with
a 109hp flathead six. Got another 500 RPM with a Buick V-6. It has
never even been in shallow water, but my dad liked novel gadgets.

Casady

On Feb 23, 11:35*am, P wrote:
Thanks all. Two questions;

When Wayne says the Rotax engines are not known for their longevity -
how do I (or my mechanic) screen for that? I guess one thing would be
the hours meter - one for each engine/where? I'm told the servicing
history is available - anything special to look for?

In addition to the usual splashing around/water skiing, I'd like to do
a bit of trolling on lake ontario - other then a bad directional
problem at this slow speed with a jet boat (not the end of the world
in a huge lake) are there any gotcha's here? Again - the sole reason
for this type of boat is that it fits in my garage - I realize
trolling in a jet boat is unusual.

The boat itself can be seen here;

http://www.boatcan.com/showboat.php?ad=1136942651

nada guides say about $4k US for that boat. My main concern would be
the engines. I've watched those things around here and they mostly
get run hard and put away wet if you know what I mean.

"P" wrote in message
...
Thanks all. Two questions;

When Wayne says the Rotax engines are not known for their longevity -
how do I (or my mechanic) screen for that? I guess one thing would be
the hours meter - one for each engine/where? I'm told the servicing
history is available - anything special to look for?

In addition to the usual splashing around/water skiing, I'd like to do
a bit of trolling on lake ontario - other then a bad directional
problem at this slow speed with a jet boat (not the end of the world
in a huge lake) are there any gotcha's here? Again - the sole reason
for this type of boat is that it fits in my garage - I realize
trolling in a jet boat is unusual.

The boat itself can be seen here;

http://www.boatcan.com/showboat.php?ad=1136942651

I can't really address your concerns about the engines, but trolling is no
problem. I do it in mine all the time. I kill one engine and idle the other
in forward. You MUST get jet steering from he
http://www.cobrajetsteering.com/ if you get that boat. When I put them on
mine, it all of a sudden handled like my old I/O.

--Mike