2008 Yamaha F150 - How long should it take...
 

On Mon, 22 Dec 2008 09:06:00 -0500, "Reginald P. Smithers III, Esq."
wrote:

wrote:
On Dec 22, 8:42 am, "Reginald P. Smithers III, Esq."
wrote:
Salmonbait wrote:
On Sun, 21 Dec 2008 21:48:53 -0500, Jim wrote:
Salmonbait wrote:
On Sun, 21 Dec 2008 18:00:36 -0500, "Billgran" wrote:
"Salmonbait" wrote in message
...
I've got the double sided muffs, the best one's West Marine sells, with
water coming to both sides. Maybe the impeller's shot. Today I'm going to
put the engine in a big garbage can, fill the can with water and start the
engine. If I don't get some water from the 'pee hole' then I'll know
something's dicked up with the enging.
--
Be sure that the water level in the bucket is at least 1" above the split
where the gearcase is bolted to the exhaust section.
Bill Grannis
service manager
It came almost to the bottom of the anti-cavitation plate, above the
cooling water inlets. If I were on the muffs, it would only come as high as
the inlet. I don't understand why an increase over that is necessary.
--
Salmonbait
The water level must be above the impeller. When you are on muffs the
water is pushed up to the impeller. When you are in the tank the
inpeller must be submurged in water.
Well, ****. Learn something new every day.
The water was almost up to the bottom of the anti-cavitation plate. A good,
healthy stream was coming out the pee hole. The engine ran normally, with
no overheating warnings or anything for about twenty minutes, to insure the
gas with the stabilizer got into the engine.
I guess we'll see in the spring. I went to the Yamaha site to buy a manual.
Couldn't find one for my year. They show only 2005 and earlier.
Bill, Dave, you guys sell service manuals for 2008 Yamaha F150's?
--
Salmonbait
SB,
If water was coming from the pilot hole (I refuse to call it a pee
hole), it was above the impeller.- Hide quoted text -

- Show quoted text -

Oh, come on! Now you're just making perfect sense. You need to
interject a bunch of third grade like insults and vulgarities. Some
think that it makes you believable even if you don't know anything.

Let me try to do better. mmmmmm let's see...... OK :

"JohnH you idiot, you are an embarrassment to pee holes around the
world..... " ;)

Hows that?

Better. At least you didn't make me an embarrassment to 'jackals' around
the world.
--
We say, "THANK YOU, REGGIE"

Salmonbait

2008 Yamaha F150 - How long should it take...
 

Gene wrote:
On Mon, 22 Dec 2008 09:34:21 -0500, hk wrote:

Reginald P. Smithers III, Esq. wrote:
Salmonbait wrote:
On Sun, 21 Dec 2008 21:48:53 -0500, Jim wrote:

Salmonbait wrote:
On Sun, 21 Dec 2008 18:00:36 -0500, "Billgran"
wrote:

"Salmonbait" wrote in message
...
I've got the double sided muffs, the best one's West Marine sells,
with
water coming to both sides. Maybe the impeller's shot. Today I'm
going to
put the engine in a big garbage can, fill the can with water and
start the
engine. If I don't get some water from the 'pee hole' then I'll know
something's dicked up with the enging.
--
Be sure that the water level in the bucket is at least 1" above the
split where the gearcase is bolted to the exhaust section.

Bill Grannis
service manager

It came almost to the bottom of the anti-cavitation plate, above the
cooling water inlets. If I were on the muffs, it would only come as
high as
the inlet. I don't understand why an increase over that is necessary.
--

Salmonbait
The water level must be above the impeller. When you are on muffs the
water is pushed up to the impeller. When you are in the tank the
inpeller must be submurged in water.
Well, ****. Learn something new every day.

The water was almost up to the bottom of the anti-cavitation plate. A
good,
healthy stream was coming out the pee hole. The engine ran normally, with
no overheating warnings or anything for about twenty minutes, to
insure the
gas with the stabilizer got into the engine.

I guess we'll see in the spring. I went to the Yamaha site to buy a
manual.
Couldn't find one for my year. They show only 2005 and earlier.

Bill, Dave, you guys sell service manuals for 2008 Yamaha F150's?
--

Salmonbait
SB,
If water was coming from the pilot hole (I refuse to call it a pee
hole), it was above the impeller.

Pilot hole? What's the etymology?

Etymology? A translation from Japanese..... "oshikko kuchi"


Well, that explains it.
-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------

2008 Yamaha F150 - How long should it take...
 

Salmonbait wrote:
On Mon, 22 Dec 2008 09:34:21 -0500, hk wrote:

Reginald P. Smithers III, Esq. wrote:
Salmonbait wrote:
On Sun, 21 Dec 2008 21:48:53 -0500, Jim wrote:

Salmonbait wrote:
On Sun, 21 Dec 2008 18:00:36 -0500, "Billgran"
wrote:

"Salmonbait" wrote in message
...
I've got the double sided muffs, the best one's West Marine sells,
with
water coming to both sides. Maybe the impeller's shot. Today I'm
going to
put the engine in a big garbage can, fill the can with water and
start the
engine. If I don't get some water from the 'pee hole' then I'll know
something's dicked up with the enging.
--
Be sure that the water level in the bucket is at least 1" above the
split where the gearcase is bolted to the exhaust section.

Bill Grannis
service manager

It came almost to the bottom of the anti-cavitation plate, above the
cooling water inlets. If I were on the muffs, it would only come as
high as
the inlet. I don't understand why an increase over that is necessary.
--

Salmonbait
The water level must be above the impeller. When you are on muffs the
water is pushed up to the impeller. When you are in the tank the
inpeller must be submurged in water.
Well, ****. Learn something new every day.

The water was almost up to the bottom of the anti-cavitation plate. A
good,
healthy stream was coming out the pee hole. The engine ran normally, with
no overheating warnings or anything for about twenty minutes, to
insure the
gas with the stabilizer got into the engine.

I guess we'll see in the spring. I went to the Yamaha site to buy a
manual.
Couldn't find one for my year. They show only 2005 and earlier.

Bill, Dave, you guys sell service manuals for 2008 Yamaha F150's?
--

Salmonbait
SB,
If water was coming from the pilot hole (I refuse to call it a pee
hole), it was above the impeller.

Pilot hole? What's the etymology?
-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------

My Yamaha F150 owner's manual calls the hole a 'pilot hole'.

Here's their address in case you need it:

Yamaha Motor Corporation, USA
1270 Chastain Road
Kennesaw, GA 30144

--
We say, "THANK YOU, REGGIE"

Salmonbait


I asked for the etymology.

-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------

2008 Yamaha F150 - How long should it take...
 

hk wrote:
Salmonbait wrote:
On Mon, 22 Dec 2008 09:34:21 -0500, hk wrote:

Reginald P. Smithers III, Esq. wrote:
Salmonbait wrote:
On Sun, 21 Dec 2008 21:48:53 -0500, Jim wrote:

Salmonbait wrote:
On Sun, 21 Dec 2008 18:00:36 -0500, "Billgran"
wrote:

"Salmonbait" wrote in message
...
I've got the double sided muffs, the best one's West Marine
sells, with
water coming to both sides. Maybe the impeller's shot. Today
I'm going to
put the engine in a big garbage can, fill the can with water
and start the
engine. If I don't get some water from the 'pee hole' then I'll
know
something's dicked up with the enging.
--
Be sure that the water level in the bucket is at least 1" above
the split where the gearcase is bolted to the exhaust section.

Bill Grannis
service manager

It came almost to the bottom of the anti-cavitation plate, above the
cooling water inlets. If I were on the muffs, it would only come
as high as
the inlet. I don't understand why an increase over that is
necessary.
--

Salmonbait
The water level must be above the impeller. When you are on muffs
the water is pushed up to the impeller. When you are in the tank
the inpeller must be submurged in water.
Well, ****. Learn something new every day.

The water was almost up to the bottom of the anti-cavitation plate.
A good,
healthy stream was coming out the pee hole. The engine ran
normally, with
no overheating warnings or anything for about twenty minutes, to
insure the
gas with the stabilizer got into the engine.

I guess we'll see in the spring. I went to the Yamaha site to buy a
manual.
Couldn't find one for my year. They show only 2005 and earlier.

Bill, Dave, you guys sell service manuals for 2008 Yamaha F150's?
--

Salmonbait
SB,
If water was coming from the pilot hole (I refuse to call it a pee
hole), it was above the impeller.

Pilot hole? What's the etymology?
-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------

My Yamaha F150 owner's manual calls the hole a 'pilot hole'.
Here's their address in case you need it:

Yamaha Motor Corporation, USA
1270 Chastain Road
Kennesaw, GA 30144

--
We say, "THANK YOU, REGGIE"

Salmonbait


I asked for the etymology.

-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------

If you want to know the etymology, look it up.

2008 Yamaha F150 - How long should it take...
 

hk wrote:

If water was coming from the pilot hole (I refuse to call it a pee
hole), it was above the impeller.

Pilot hole? What's the etymology?

We've always called it a '****er' in the shop, and the "tell-tale" in
front of customers. :-)



--
Regards,
Dave Brown
Brown's Marina Ltd
http://brownsmarina.com/

2008 Yamaha F150 - How long should it take...
 

Dave Brown wrote:
hk wrote:

If water was coming from the pilot hole (I refuse to call it a pee
hole), it was above the impeller.

Pilot hole? What's the etymology?

We've always called it a '****er' in the shop, and the "tell-tale" in
front of customers. :-)




Well, I can use "****er" and "Tell-Tale" and "Pilot Hole", but I am not
going to call it a pee hole. I have my limits you know. ;)

2008 Yamaha F150 - How long should it take...
 

Reginald P. Smithers III, Esq. wrote:
hk wrote:
Salmonbait wrote:


I asked for the etymology.

-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------

If you want to know the etymology, look it up.


Bite me.

2008 Yamaha F150 - How long should it take...
 

Boater wrote:
Reginald P. Smithers III, Esq. wrote:
hk wrote:
Salmonbait wrote:


I asked for the etymology.

-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------

If you want to know the etymology, look it up.


Bite me.

What is the etymology of "Bite me"?

2008 Yamaha F150 - How long should it take...
 

Reginald P. Smithers III, Esq. wrote:
Boater wrote:
Reginald P. Smithers III, Esq. wrote:
hk wrote:
Salmonbait wrote:


I asked for the etymology.

-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------

If you want to know the etymology, look it up.


Bite me.

What is the etymology of "Bite me"?


Never mind. I found the answer.

http://www.zazzle.com/bite_me_shirt-235741065044131387

2008 Yamaha F150 - How long should it take...
 

On Mon, 22 Dec 2008 11:51:19 -0500, hk wrote:

Salmonbait wrote:
On Mon, 22 Dec 2008 09:34:21 -0500, hk wrote:

Reginald P. Smithers III, Esq. wrote:
Salmonbait wrote:
On Sun, 21 Dec 2008 21:48:53 -0500, Jim wrote:

Salmonbait wrote:
On Sun, 21 Dec 2008 18:00:36 -0500, "Billgran"
wrote:

"Salmonbait" wrote in message
...
I've got the double sided muffs, the best one's West Marine sells,
with
water coming to both sides. Maybe the impeller's shot. Today I'm
going to
put the engine in a big garbage can, fill the can with water and
start the
engine. If I don't get some water from the 'pee hole' then I'll know
something's dicked up with the enging.
--
Be sure that the water level in the bucket is at least 1" above the
split where the gearcase is bolted to the exhaust section.

Bill Grannis
service manager

It came almost to the bottom of the anti-cavitation plate, above the
cooling water inlets. If I were on the muffs, it would only come as
high as
the inlet. I don't understand why an increase over that is necessary.
--

Salmonbait
The water level must be above the impeller. When you are on muffs the
water is pushed up to the impeller. When you are in the tank the
inpeller must be submurged in water.
Well, ****. Learn something new every day.

The water was almost up to the bottom of the anti-cavitation plate. A
good,
healthy stream was coming out the pee hole. The engine ran normally, with
no overheating warnings or anything for about twenty minutes, to
insure the
gas with the stabilizer got into the engine.

I guess we'll see in the spring. I went to the Yamaha site to buy a
manual.
Couldn't find one for my year. They show only 2005 and earlier.

Bill, Dave, you guys sell service manuals for 2008 Yamaha F150's?
--

Salmonbait
SB,
If water was coming from the pilot hole (I refuse to call it a pee
hole), it was above the impeller.

Pilot hole? What's the etymology?
-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------

My Yamaha F150 owner's manual calls the hole a 'pilot hole'.

Here's their address in case you need it:

Yamaha Motor Corporation, USA
1270 Chastain Road
Kennesaw, GA 30144

--
We say, "THANK YOU, REGGIE"

Salmonbait


I asked for the etymology.

-----------------
www.Newsgroup-Binaries.com - *Completion*Retention*Speed*
Access your favorite newsgroups from home or on the road
-----------------

And they'll be happy to give it to you.
--
We say, "THANK YOU, REGGIE"

Salmonbait