Home |
Search |
Today's Posts |
#6
posted to rec.boats.electronics
|
|||
|
|||
Ethernet
Larry,
Effectively, I am bus wiring. The boat has water tight bulkheads and sea doors between compartments. I have 2 inch pipe ports for through wiring. Every compartment has a termination cabinet. I will max wire compartment to compartment and assign paths as required. The use of preformed, multi-strand cable is easy to seal the bulkhead transits. The DC supply and return is bussed seperately with dedicated bulkhead connectors, where each compartment has its own fusing. All AC power is wired ckt by ckt from a custom made distribution panel with large contactors and electronic relays which allow source switching and load balancing though dedicated 2" bulkhead ports to buss blocks in each compartment. If you know a source for the multi wire 16 ga cable, please let me know. Steve "Larry" wrote in message ... "Steve Lusardi" wrote in news:gf9nj8$28b$03$1 @news.t-online.com: 100 pair 16 ga cable Do you realize the diameter this cable will be? I'd have to hang it from the overhead as it won't fit in the wireways! |