Home |
Search |
Today's Posts |
#3
![]()
posted to rec.boats.electronics
|
|||
|
|||
![]()
Bruce,
Thank you, that is the advice I needed. In my previous life, many years ago, I repaired airborne radars and all the maggies I changed, the frequency driftted beyond the the ability of the LO to track. In those days, I had at my disposal a spectrum analyser, which I no longer have. I never saw one that double pulsed. From your information, it looks like I do not need any special test equipment, but a dummy load would be nice. I'm not sure radiating my neihborhood for 24 hours would be appreciated. Are there any available at reasonable prices that would fit the Furuno slot-line antenna mount? Steve "Bruce in alaska" wrote in message ... In article , "Steve Lusardi" wrote: I have just purchased a used FURUNO antenna and gearbox. I have not received it yet. It was made in 2005 and has been used on a commercial ship. It is probably safe to say heavily used, but the price was right and it is sold as functioning well. I will, disassemble it, repaint and mechanically inspect and repair as necessary, but my question is about the magnetron. Furuno states the magnetron is rated for 2,000 to 3,000 hours. I have no maintenance history, but is to safe to think that without recent replacement, the magnetron is used up? Should I just replace the magnetron as just a general service replacement? It is an RSB0074-0062 12KW. Thanks in advance, Steve If it was "Me". I would install the radar, and run it for a day or so, BEFORE I made any decision to replace the Magnetron, since the Maggie is the MOST EXPENSIVE Replacement Part in a Radar of this class. Your looking at $200 - $400 US. While I had the TR Pan out I would look at the Maggie and see if it had been replaced already, or was the original Toshiba OEM Unit. Once you have run the thing for a good 24 Hours, you will burnt all of the moisture out of the Maggie and Waveguides, and then can evaluate the state of the Maggie. Look for Double Targets on the same bearing and very close together. This is caused by Double Pulsing, and a sign of a Very Aged Maggie. Check the Tuning Range, of the receiver and see if the Maggies Frequency is still near the Center of the Receiver Tuning Range. High Hour Maggies tend to drift Off Frequency and be near the tuning Range Edges. I have seen those Toshiba OEM Units in Furuno Radars that still had plenty of life after 10 years, of activity on Fishing Vessels. -- Bruce in alaska add path after fast to reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Going RADAR! | General | |||
Radar | Electronics | |||
Prop Size - Advice on Advice? | General | |||
Which Radar? | ASA | |||
WTB OLD RADAR | Electronics |