| Home |
| Search |
| Today's Posts |
|
#1
posted to rec.boats.electronics
|
|||
|
|||
Adler-Barbour Cold Machine voltage range.
I have a 1982 SFV-1 unit with 16' between the compressor and evaporator
and have just rewired it with 10AWG. The manual states that the unit shuts down for 10.5v at the terminals and will restart at 11.5v. Is the 11.5v measured just before the 7.6A starting current flows or while it is flowing and therefore causing a further 400mv drop in my case? Dick |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Cold Machine CU-100 - anything better and cheaper? | Cruising | |||
| Adler Barbour refrig'current | Electronics | |||
| Waeco/Adler Barbour refrig - strange behaviour. | Cruising | |||
| FS Morgan 461 removals - Techumseh and Adler-Barbour Cold Pump Refrigeration, in St. Petersburg, FL | Marketplace | |||
| Adler Barbour e-mail or web site | Cruising | |||
Threaded Mode
