BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   Electronics (https://www.boatbanter.com/electronics/)
-   -   LF 12 volt LCD monitor 15 to 17 inch (https://www.boatbanter.com/electronics/80542-lf-12-volt-lcd-monitor-15-17-inch.html)

PR May 11th 07 04:11 PM

LF 12 volt LCD monitor 15 to 17 inch
 
Would anyone happen to know of a supplier of 12 volt LCD's hopefully in
Canada? Don't need marine spec as such just 12 volt.

Thanks...

Hanz May 11th 07 07:02 PM

LF 12 volt LCD monitor 15 to 17 inch
 
I would go to a computer/best buy and look at the monitor. The 12v ones
have an external 'brick'. If it has output of 12v and the monitor looks
'good' buy it.

BUT. I won't run it off the house battery. They have voltage anywhere
from 10v to 14.5v. I've been running monitor/tv and computer off my
house battery BUT I have a 12v-12v converter. Look at
:http://www.logicsupply.com/product_i...roducts_id/504

It can run from 6v to 24v. I put them into a box and run a line with the
plug into the monitor/tv.

The tv I got from Walmart and the monitors I got from BestBuy.

Hope this helps.

Hanz


PR wrote:
Would anyone happen to know of a supplier of 12 volt LCD's hopefully in
Canada? Don't need marine spec as such just 12 volt.

Thanks...



PR May 11th 07 10:29 PM

LF 12 volt LCD monitor 15 to 17 inch
 
Thank you for that advice Hanz - it seems to be a good idea. I'm actually
sourcing for a marine customer so I'll offer them that solution. Boats
definitely would have an unstable DC supply.

Russ



On Fri, 11 May 2007 14:02:26 -0400, Hanz wrote:
I would go to a computer/best buy and look at the monitor. The 12v ones
have an external 'brick'. If it has output of 12v and the monitor looks
'good' buy it.

BUT. I won't run it off the house battery. They have voltage anywhere
from 10v to 14.5v. I've been running monitor/tv and computer off my
house battery BUT I have a 12v-12v converter. Look at
:http://www.logicsupply.com/product_i...roducts_id/504

It can run from 6v to 24v. I put them into a box and run a line with the
plug into the monitor/tv.

The tv I got from Walmart and the monitors I got from BestBuy.

Hope this helps.

Hanz


PR wrote:
Would anyone happen to know of a supplier of 12 volt LCD's hopefully in
Canada? Don't need marine spec as such just 12 volt.

Thanks...



b393capt May 12th 07 12:45 AM

LF 12 volt LCD monitor 15 to 17 inch
 
On May 11, 11:11 am, PR wrote:
Would anyone happen to know of a supplier of 12 volt LCD's hopefully in
Canada? Don't need marine spec as such just 12 volt.

Thanks...


Your actually better off getting something that needs 14.6v or higher
and then getting a DC-DC converter to step up the voltage. These
converters will deliver 14.6 or higher (mine is 18v) no matter the
voltage is between 11v or 14.6v. Also, all the decent sized screens
require 18v or highter.

I ended up going to PC-Richards Appliance Giant (a northeast provider)
to buy my monitor, as the Best Buy and Circuit City products didn't
have bricks, but rather took AC voltage directly into their units.

Beware, some of these DC-DC devices can be damaged when the voltage
falls below 10v, so you should have them shut off when starting the
engine or using the windlass.

b393capt


Jack Erbes May 12th 07 10:13 AM

LF 12 volt LCD monitor 15 to 17 inch
 
PR wrote:
Thank you for that advice Hanz - it seems to be a good idea. I'm actually
sourcing for a marine customer so I'll offer them that solution. Boats
definitely would have an unstable DC supply.

Russ


Another option to consider is using a small/cheap DC to AC inverter with
a LCD that has an AC power input. Small inverters are getting pretty
cheap (especially the modified sine wave stuff) and they are not too bad
as far as the power draw for a smaller load.

They must have inverters up there in the Canadian woods by now, aye? We
got em down here in Maine now, they're wicked cheap too. Yep, you
betcha...

Jack

--
Jack Erbes in Ellsworth, Maine, USA - jackerbes at adelphia dot net
(also receiving email at jacker at midmaine.com)

Hanz May 12th 07 05:36 PM

LF 12 volt LCD monitor 15 to 17 inch
 
Be carefull of RFI from AC-DC inverter.

Hanz

Jack Erbes wrote:
PR wrote:

Thank you for that advice Hanz - it seems to be a good idea. I'm actually
sourcing for a marine customer so I'll offer them that solution. Boats
definitely would have an unstable DC supply.

Russ



Another option to consider is using a small/cheap DC to AC inverter with
a LCD that has an AC power input. Small inverters are getting pretty
cheap (especially the modified sine wave stuff) and they are not too bad
as far as the power draw for a smaller load.

They must have inverters up there in the Canadian woods by now, aye? We
got em down here in Maine now, they're wicked cheap too. Yep, you
betcha...

Jack



Al Thomason May 12th 07 08:10 PM

LF 12 volt LCD monitor 15 to 17 inch
 
Surplus HP F1064A DC-DC converts. They were designed for their 12v
Lap Tops to run off of car "12v" so have a wide range of input
voltages supported. They supply I think around 50 watts.

Shows up on Ebay every once and a while for under $10

-al-


On 11 May 2007 16:45:55 -0700, b393capt
wrote:

On May 11, 11:11 am, PR wrote:
Would anyone happen to know of a supplier of 12 volt LCD's hopefully in
Canada? Don't need marine spec as such just 12 volt.

Thanks...


Your actually better off getting something that needs 14.6v or higher
and then getting a DC-DC converter to step up the voltage. These
converters will deliver 14.6 or higher (mine is 18v) no matter the
voltage is between 11v or 14.6v. Also, all the decent sized screens
require 18v or highter.

I ended up going to PC-Richards Appliance Giant (a northeast provider)
to buy my monitor, as the Best Buy and Circuit City products didn't
have bricks, but rather took AC voltage directly into their units.

Beware, some of these DC-DC devices can be damaged when the voltage
falls below 10v, so you should have them shut off when starting the
engine or using the windlass.

b393capt



b393capt May 14th 07 01:30 PM

LF 12 volt LCD monitor 15 to 17 inch
 
On May 12, 5:13 am, Jack Erbes wrote:
PR wrote:
Thank you for that advice Hanz - it seems to be a good idea. I'm actually
sourcing for a marine customer so I'll offer them that solution. Boats
definitely would have an unstable DC supply.


Russ


Another option to consider is using a small/cheap DC to AC inverter with
a LCD that has an AC power input. Small inverters are getting pretty
cheap (especially the modified sine wave stuff) and they are not too bad
as far as the power draw for a smaller load.

They must have inverters up there in the Canadian woods by now, aye? We
got em down here in Maine now, they're wicked cheap too. Yep, you
betcha...

Jack

--
Jack Erbes in Ellsworth, Maine, USA - jackerbes at adelphia dot net
(also receiving email at jacker at midmaine.com)



A DC-DC solutions uses much less power then an inverter, and is
entirely silent (if you use line isolators to eliminate any ground
feedback, for example when connecting a DVD player, etc.)







Stewart Vane-Tempest May 15th 07 10:11 AM

LF 12 volt LCD monitor 15 to 17 inch
 
I"b393capt" wrote in message
ups.com...
On May 12, 5:13 am, Jack Erbes wrote:
PR wrote:
Thank you for that advice Hanz - it seems to be a good idea. I'm
actually
sourcing for a marine customer so I'll offer them that solution. Boats
definitely would have an unstable DC supply.


Russ


Another option to consider is using a small/cheap DC to AC inverter with
a LCD that has an AC power input. Small inverters are getting pretty
cheap (especially the modified sine wave stuff) and they are not too bad
as far as the power draw for a smaller load.

They must have inverters up there in the Canadian woods by now, aye? We
got em down here in Maine now, they're wicked cheap too. Yep, you
betcha...

Jack

--
Jack Erbes in Ellsworth, Maine, USA - jackerbes at adelphia dot net
(also receiving email at jacker at midmaine.com)



A DC-DC solutions uses much less power then an inverter, and is
entirely silent (if you use line isolators to eliminate any ground
feedback, for example when connecting a DVD player, etc.)






I use a small DC stabiliser from a UK company called Amperor. It works very
well indeed.
http://www.amperordirect.co.uk/produ...Stabiliser.asp

Stewart




All times are GMT +1. The time now is 04:15 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com