Home |
Search |
Today's Posts |
#3
![]()
posted to rec.boats.electronics
|
|||
|
|||
![]()
Peter,
You got one answer with no explanation. A circuit breaker is a switch. - Period (Some used in vehicles are self -resetting, they are still switches but with no manual control.) The features note means that it is designed to be used as a manually controlled disconnect under load. The manufacturer believes this device can do that safely. This is largely a moot point in your case. The windless switches are the devices you use to control the actual motor. You will not be doing that if your arrangement is at all like any I've ever seen. The only time you will use this as a switch is if you choose to disconnect the feed to the actual switching circuit for the windless. Circuit breakers used to be certified to interrupt the current at rated load or greater only five times, and came with instructions to replace them if they had been tripped or manually operated more than twice. Then along came the category called Switch Duty Breakers (SWB). These are certified to pass UL, NFPA and NMEA requirements on matter how many times they are cycled. Most still come with a note to replace if they are opened by overcurrent - this is because the contact might be damaged. I am paranoid (I find it serves me well) so I put Switch Duty Breakers in my shop wiring to control the two banks of lights. Though I had every intention of putting a pair of 3-way switches by the two doors, I have been turning the lights on out there at least once a day for fifteen years. When I tested them last (not something a normal person can do), both were still within specification. I will put in the above mentioned switches someday - if I don't kill my self getting to the breaker box in the dark before that. Matt Colie Yachtman's Technical Support www.yachtek.com Peter Hendra wrote: Larry, I have jusy puchased a "Blue Seal" brand - "Bussman series High Amp Circuit Breaker" - 125 Amps; for my anchor winch circuit. Stated on the packaging under "featuires" is "combines switching and circuit breaker function into one unit" Question: Is it good practice to use it as a switch? cheers Peter Hendra |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Ping: Larry | Cruising | |||
Ping: Larry | Cruising | |||
Fishfinder??? | ASA | |||
AC/DC Circuit Breakers | Cruising | |||
AC/DC Circuit Breakers | ASA |