Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats.electronics
Tapio Sokura
 
Posts: n/a
Default Hummmmmmmmmm (feed back loop ) ....

b393capt wrote:
As I go to debug this I notice:
1) Moving wires, has no effect on hum. (neither louder or softer)
2) If I power off DVD player only, hum remains.
3) If I unplug DVD player (from 12vdc), hum disappears. (even with RCA
connected)
4) If I unplug the RCA cables, hum dissappears


Sounds like a ground loop on the 12 VDC side to me. A galvanic isolator
in the audio RCA cables might fix it. This leaves the video signal
unisolated, but it might be enough for getting rid of the audio hum.
Note that this device is not the same thing you can put on your shore
power line, to prevent electrolysis on your boat's underwater metal parts.

This picture shows what the device I'm talking about might look like:
http://www.biltema.fi/osteri/data/Kuvat/31_441iso.jpg . There are small
audio transformers inside the box, they break the galvanic connection
between the DVD player and TV, but let audio frequencies pass. It should
not cost much more than 20 dollars/euros. You might find one in an
electronic parts store or in a shop that specializes in audio equipment.

Tapio
  #2   Report Post  
posted to rec.boats.electronics
GregS
 
Posts: n/a
Default Hummmmmmmmmm (feed back loop ) ....

In article , Tapio Sokura wrote:
b393capt wrote:
As I go to debug this I notice:
1) Moving wires, has no effect on hum. (neither louder or softer)
2) If I power off DVD player only, hum remains.
3) If I unplug DVD player (from 12vdc), hum disappears. (even with RCA
connected)
4) If I unplug the RCA cables, hum dissappears


Sounds like a ground loop on the 12 VDC side to me. A galvanic isolator
in the audio RCA cables might fix it. This leaves the video signal
unisolated, but it might be enough for getting rid of the audio hum.
Note that this device is not the same thing you can put on your shore
power line, to prevent electrolysis on your boat's underwater metal parts.

This picture shows what the device I'm talking about might look like:
http://www.biltema.fi/osteri/data/Kuvat/31_441iso.jpg . There are small
audio transformers inside the box, they break the galvanic connection
between the DVD player and TV, but let audio frequencies pass. It should
not cost much more than 20 dollars/euros. You might find one in an
electronic parts store or in a shop that specializes in audio equipment.

Tapio


A HREF="http://www.radioshack.com/product/index.
jsp?productId=2062214&cp=&origkw=loop+isolator&kw= loop+isolator&parentPage=search"isolator/A
  #3   Report Post  
posted to rec.boats.electronics
b393capt
 
Posts: n/a
Default Hummmmmmmmmm (feed back loop ) ....


Thankyou !!

This did the trick, no more humming !!

Dan

  #4   Report Post  
posted to rec.boats.electronics
b393capt
 
Posts: n/a
Default Hummmmmmmmmm (feed back loop ) ....

Tapio,

A galvanic isolator in the audio RCA cables might fix it.

Thankyou !! This did the trick, no more humming !!

Dan

  #5   Report Post  
posted to rec.boats.electronics
Larry
 
Posts: n/a
Default Hummmmmmmmmm (feed back loop ) ....

"b393capt" wrote in
ups.com:

A galvanic isolator in the audio RCA cables might fix it.


Hmm...you should try finding it in a big stadium with 100 mic jacks, 24
speakers in the vaulted ceiling all hooked to 12 different AC circuits.

Ground loops drive PA system technicians crazy.....



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Everglades back country wilderness cruise report Wayne.B General 7 February 25th 06 06:54 PM
Everglades back country wilderness cruise report Wayne.B Cruising 7 February 25th 06 06:54 PM
Carribean Sail Don White General 16 November 18th 05 01:23 AM
A Recreational Boating Message Skipper General 7 October 12th 05 10:25 PM
A Recreational Boating Message Skipper General 0 October 12th 05 06:42 PM


All times are GMT +1. The time now is 01:20 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017