Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Icom 802 and SGC Smarttuner
Does anyone know if an Icom 802 SSB can be used with a SGC SG-30
smarttuner? |
#2
|
|||
|
|||
In article 1122549331.d19d2b99382a57b14e8607e04cf0a2a9@teran ews,
hhh wrote: Does anyone know if an Icom 802 SSB can be used with a SGC SG-30 smarttuner? I am sure it will work, but the autotune switch on the radio may not cause the tuner to retune. Me |
#3
|
|||
|
|||
Me wrote in :
I am sure it will work, but the autotune switch on the radio may not cause the tuner to retune. Me It will work but you must have the SGC tuner control box by the radio and because the radio will not go into tune unless you have an Icom tuner plugged into it, you'll have to whistle in the mic to feed RF to the tuner. Mixing these sucks.....get the AT-130.. -- Larry |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|