| Home |
| Search |
| Today's Posts |
|
#13
|
|||
|
|||
On Sat, 07 May 2005 07:57:54 -0400, Jack Erbes
wrote: If you need to know the COM port number, you can then find that listed in the Device Manager under COM and LPT ports. The port will usually be identified with the adapter or maybe the IC that does the A/D conversion. Jack On my computer, the USB/serial adaptor will appear as a different COM port, depending on which of the three USB ports it is plugged into. -- Peter Bennett, VE7CEI peterbb4 (at) interchange.ubc.ca new newsgroup users info : http://vancouver-webpages.com/nnq GPS and NMEA info: http://vancouver-webpages.com/peter Vancouver Power Squadron: http://vancouver.powersquadron.ca |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| how to connect notebook on a 12V DC | Electronics | |||
| how2 connect a "day" fuel tank to engine ? | Cruising | |||
| Before you connect new NMEA and blow your network.... | Cruising | |||
| Before you connect new NMEA and blow your network.... | Electronics | |||
| Ignorant Dupes | ASA | |||
Threaded Mode
