LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #17   Report Post  
Doug Dotson
 
Posts: n/a
Default

I was under the impression that it does require PACTOR II. Winlink does
for sure and SailMail seems to track Winlink in many ways. Pactor I is
pretty
slow at 100 baud. Sorry for the confusion. Another factor is the connect
time
restriction. At 100 baud you can't get much done with the alotted time and
it
also ties up the shore station keeping others from using it. Winlink is so
crouded
now that they have mandated Pactor II as a minimum. But at close to 1 BU
for the SCS TNCs it becomes a hefty item.

Doug, k3qt

"chuck" wrote in message
...
Doug, you might have given the impression SailMail requires Pactor II.
According to their primer

http://www.sailmail.com/smprimer.htm...of%20Equipment
SailMail Primer

SailMail will work with Pactor I (a la Kam+) albeit at slower speed.

Regards,

Chuck


Doug Dotson wrote:
"Wayne.B" wrote in message
...

On Wed, 13 Apr 2005 12:22:38 -0400, Larry W4CSC
wrote:

A computer and packet TNC (terminal node controller), which is like a
special modem for packet HF radio. To operate on HF, you'd need a TNC
made
for HF, not VHF. On VHF we operate 1200 baud with wide shift. On HF,
we
are limited to 300 baud and very narrow shift. The Kantronics KAM '98
is
such a modem:

======================

Thanks.

Several more questions:

Is the Kantronics TNC comparable to something like the SCS PTC-IIpro
which is the recommended unit for SailMail?



They have alot of the same features except for the one you really need
for SailMail. That being Pactor II and Pactor III modes. The SCS TNCs
are the only ones to offer it because it is proprietary.


How would you automate sending a new position packet every hour or so?



The TNC does that for you. At least my KAM Plus does.


Is there any acknowledgement that your position report was correctly
received?



I'm not sure, but I don;t think so. The position reporting used by
Winlink is
though. I don;t beleive SailMail has any position reporting feature but I
haven't used SailMail for a couple of years.


Can a position report be sent to APRS via EMAIL?



Not as far as I know, but check their website for lots of details.
www.aprs.org


Doug, k3qt
s/v Callista


 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Good yard for project boat in north shore massachusetts? Chris Cruising 3 November 15th 04 03:35 PM
Into and out of the Kayak jeffh129 General 12 May 6th 04 05:04 PM
European Shore Power and European Yacht Wiring Charlie Johnson Electronics 3 April 30th 04 01:09 PM
FS: Shore power cable in NY, final hours! Bobsprit Marketplace 0 March 17th 04 05:04 PM
Shore Power Parallax Cruising 5 October 15th 03 02:18 PM


All times are GMT +1. The time now is 03:31 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017