LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #3   Report Post  
Paul L
 
Posts: n/a
Default Autopilot fails on Raytheon ST5000+ with "No Data" error

Is the compass mounted 'correctly' and not being affected by magnetics near
it? (You probably have already checked this)

Paul
www.jcruiser.org
"Donagh" wrote in message
om...
Hello, I have a 38ft (11.5m) sailing cruiser with a Raytheon ST5000+
autopilot, Raytheon radar/chart plotter with Wind, Depth, Speed, GPS,
fluxgate compass, etc.
The autopilot works only when travelning west. Attempting to calibrate
the system always fails at the "Turn Boat" phase with a "Too Fast"
error even thou I've done the turn dozens of times exactly by the
book. The ST5000+ compass heading is wildly inaccurate. As the boat
turns the ST5000+ compass display jumps in large increments rather
than smoothly as I would expect.
Tying the autopilot in any direction other than West results in a
change of direction or a "No Data" error.
Any ideas?

Many thanks, Donagh.



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Autopilot fails on Raytheon ST5000+ with "No Data" error Donagh Cruising 6 June 12th 04 05:01 PM
Furuno 1721 MKII Compass input?? (long) Steve Electronics 3 January 13th 04 02:50 AM


All times are GMT +1. The time now is 04:34 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017