WTB: 11" X 8" Electrical panel
 

I have a J/35 that has a DC electrical panel that that has 13 switches
that is full. I've added a masthead tri-color and anchor light so now
I need to add 2 more breakers. The current panel has a analog DC volt
meter and 4 breakers on the right and 9 breakers on the left. I do
not need the DC volt meter, as I have a Heart interface. I'd like to
find a replacement panel that would have 9 x 9 breakers. The curent
panel is 8" x 11" inches and is made by Bass Products, Salem MA. Are
there any sources for a basic panel that would fit in this space?

Thanks...

Drew

11" X 8" Electrical panel
 

Check out Paneltronics.

wrote in message
...
I have a J/35 that has a DC electrical panel that that has 13 switches
that is full. I've added a masthead tri-color and anchor light so now
I need to add 2 more breakers. The current panel has a analog DC volt
meter and 4 breakers on the right and 9 breakers on the left. I do
not need the DC volt meter, as I have a Heart interface. I'd like to
find a replacement panel that would have 9 x 9 breakers. The curent
panel is 8" x 11" inches and is made by Bass Products, Salem MA. Are
there any sources for a basic panel that would fit in this space?

Thanks...

Drew

11" X 8" Electrical panel
 

Blue Sea has a whole new series of electrical panels in different sizes..

http://www.bluesea.com/

Rusty O

WTB: 11" X 8" Electrical panel
 

On Fri, 30 Apr 2004 20:48:03 -0400, wrote:

I have a J/35 that has a DC electrical panel that that has 13 switches
that is full. I've added a masthead tri-color and anchor light so now
I need to add 2 more breakers. The current panel has a analog DC volt
meter and 4 breakers on the right and 9 breakers on the left. I do
not need the DC volt meter, as I have a Heart interface. I'd like to
find a replacement panel that would have 9 x 9 breakers. The curent
panel is 8" x 11" inches and is made by Bass Products, Salem MA. Are
there any sources for a basic panel that would fit in this space?

You can get custom aluminium panels made fairly inexpensively to your
own design at http://www.frontpanelexpress.com - but they only do the
aluminium panel - it's up to you to do the wiring and any additional
metalwork...




--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca

WTB: 11" X 8" Electrical panel
 

Peter Bennett wrote:

You can get custom aluminium panels made fairly inexpensively to your
own design at http://www.frontpanelexpress.com - but they only do the
aluminium panel - it's up to you to do the wiring and any additional
metalwork...

I seconf the recomendation for Frontpanelexpress. They made my
watermaker control and fuel management panels. Very professional
looking. You can even indent around openings so that those back lit
stick on labels are flush with the front surface.

--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com