OK so that idea won't work.
But the lower shroud might be long enough if I put the bottom insulator low
near the chainplate, and then to protect crew from getting shocked/burned ,
cover the shroud from the insulator up a ways with a plastic tube.
Will this insulation adversely affect the radio signal?
Thanks for the help.
"Garland Gray II" wrote in message
news:FuM9c.17580$Ft.5252@lakeread02...
They say there is no such thing as a stupid question, but I'm going to put
that theory to a real test.
I have removed a shroud from my catamaran to install insulators so it can
be
used as the SSB antenna. Since there is no backstay as such, a main shroud
will have to do. However, I now find that the sparmaker who rigged the
boat
is somewhat leery of my installing two more potential failure points in a
so
highly loaded and critical support (of course, all are critical). He
suggests using one of the lowers, but these just won't be very long.
In the end I expect I'll continue with the original plan to insulate a
main
shroud, but a thought came to me. The shrouds are inside a thick walled
plastic tube (which I had planned on removing), so I've wondered if rather
than using insulators I retain the plastic tube and secure a wire...or 2
or
3... along the length of the plastic tube as the antenna? I suppose the
presence of the grounded wire inside would interfere with the signal,
maybe
not. Would it work?