On Fri, 21 Nov 2003 18:32:56 GMT, Gary Schafer
wrote:

You need to tune your tuner only to provide the proper impedance match
to your transmitter. A 50 ohm SWR bridge at the transmitter will tell
you when you have achieved that.

WHOA! There you go again! If I tune my transmitter to 50 ohms
RESISTIVE, non-reactive, it will ABSORB any reflected power because
it's acting like a RESISTOR, as it should, converting reflected power
into HEAT in the final amp.....(c;


Larry W4CSC

NNNN