Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
3 stage regulator questions
Sounds like 1 state (bulk) charging to me. It should hold at acceptance
level (bulk charging voltage) while the amperage is reduced. Then it should drop to the float level, which is typically around 13.2 V. Something isn't working right unless you float level is set to the same level as bulk, which is wrong as far as I know. -- Geoff jeannette wrote in : Hi group, I bought an alternator with a built-in 3 stages regulator. The voltage coming out of it seems to be constant at 14.40v. The batteries are fully charged now and the charge current is very small (1amp) but the voltage remain at 14.40v. Is that normal?. I am told by the manufacturer that it's the way it should be. I would have thought that the voltage should come down to a lower level once the batteries are full. What do you think? Jeannette Bristol 32, San Francisco http://www.eblw.com/contepartiro/contepartiro.html |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Desalination by 2 stage nano filtration not RO - what's the difference? | Cruising | |||
3 stage charging question | Cruising |