BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   Electronics (https://www.boatbanter.com/electronics/)
-   -   Cable for GPS Antenna (https://www.boatbanter.com/electronics/103287-cable-gps-antenna.html)

Michael Porter March 10th 09 07:33 PM

Cable for GPS Antenna
 
Finally was able to get an ACR AIS B delive3red! Good-lookinig unit,
but the installation kit isn't much.15' cables! What boat b ig enough
to want AIS can use 15' cables?

No problem with the VHF antenna, but whaqt kind of cable would the GPS
antenna want? It has a BNC connector and looks like RG-58U, which
would be nice because I have somne of that hanging around. But it
could be RG-59. Any light?

Thanks,
Michael
Michael Porter Marine Design
mporter at mp-marine dot com
www.mp-marine.com

Børge Wedel Müller March 10th 09 08:00 PM

Cable for GPS Antenna
 
Hi mike

Just bougth a Comar CBS 200 - merely same problem

GPS must be connected via TNC
VHF must be connected via BNC
Both being 50 ohms connectors

And yes, it's normally the opposite!!!

GPS must be exclusive for the AIS transponder, due to clock
syncronization!!!
NMEA in, is on class B, only compass heading (generally).

Sincerelly
/Børge



"Michael Porter" skrev i meddelelsen
...
Finally was able to get an ACR AIS B delive3red! Good-lookinig unit,
but the installation kit isn't much.15' cables! What boat b ig enough
to want AIS can use 15' cables?

No problem with the VHF antenna, but whaqt kind of cable would the GPS
antenna want? It has a BNC connector and looks like RG-58U, which
would be nice because I have somne of that hanging around. But it
could be RG-59. Any light?

Thanks,
Michael
Michael Porter Marine Design
mporter at mp-marine dot com
www.mp-marine.com



Bruce In Bangkok March 11th 09 07:15 AM

Cable for GPS Antenna
 
On Tue, 10 Mar 2009 13:33:59 -0500, Michael Porter
wrote:

Finally was able to get an ACR AIS B delive3red! Good-lookinig unit,
but the installation kit isn't much.15' cables! What boat b ig enough
to want AIS can use 15' cables?

No problem with the VHF antenna, but whaqt kind of cable would the GPS
antenna want? It has a BNC connector and looks like RG-58U, which
would be nice because I have somne of that hanging around. But it
could be RG-59. Any light?

Thanks,
Michael
Michael Porter Marine Design
mporter at mp-marine dot com
www.mp-marine.com



My Garmin uses RG-58
Cheers,

Bruce
(bruceinbangkokatgmaildotcom)


All times are GMT +1. The time now is 06:59 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com