Home |
Search |
Today's Posts |
#1
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
This is how Skippy summed up his trip:
"We proceeded at flank speed, up the Saint Simons Channel, at about 8:30, and had the hook down and engine off by 10:30. We sailed the entire channel other than the anchorage, including swinging by for a close run on a beam reach so that our Angels could see us up close and get some pictures on the pier. We had a great run, covering 143 miles from anchor up to anchor down, in 23 hours. Run's the word, too, as 120 miles of that was literally a run. It was too rolly to use the pole, or we'd have gotten here quicker :{))" We had a great run and run's the word. Didn't I tell you novices that Skippy was most likely running? Didn't I tell you that he was probably running to try to minimize the rolling that sailing with quartering seas would engender? But, noooooooooo! Did you fools listen to me? Not at all, it seems. But who is it that ended up having a correct assessment of the situation? Of, course it was I, as usual. It is due to my many years of sailing experience that I can pretty much guess what is going on when Skippy is attempting to sail offshore. And, where is the spinnaker I wonder, yes I do? I guess the Pig doesn't have one or the crew doesn't know how to fly one? All that hassle with the flopping roll-ups could have been avoided by leaving the damned useless heavy thing rolled up and setting a spinnaker instead. The mainsail should have been sheeted in pretty much flat to act as a damper to any rolling that an ill-designed underbody would cause. Did I not tell everybody that Skippy still has a lot to learn? Was I not correct in my assessment yet again? And not for the last time, BTW? Wilbur Hubbard |
#2
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On 2008-10-14 21:18:20 -0400, "Wilbur Hubbard"
said: We had a great run and run's the word. Didn't I tell you novices that Skippy was most likely running? Didn't I tell you that he was probably running to try to minimize the rolling that sailing with quartering seas would engender? You didn't notice his prescript: "- Roger's right :{))"? You didn't notice that a 20-30 degree total swing was *better*? You didn't notice his calculations that kept him on the run, though he'd rather had come up to a broad reach? -- Jere Lull Xan-à-Deux -- Tanzer 28 #4 out of Tolchester, MD Xan's pages: http://web.mac.com/jerelull/iWeb/Xan/ Our BVI trips & tips: http://homepage.mac.com/jerelull/BVI/ |
#3
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
Wilbur Hubbard wrote:
Did I not tell everybody that Skippy still has a lot to learn? Was I not correct in my assessment yet again? In a word, "no". Cheers Martin |
#4
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]() "Wilbur Hubbard" wrote in message anews.com... This is how Skippy summed up his trip: "We proceeded at flank speed, up the Saint Simons Channel, at about 8:30, and had the hook down and engine off by 10:30. We sailed the entire channel other than the anchorage, including swinging by for a close run on a beam reach so that our Angels could see us up close and get some pictures on the pier. We had a great run, covering 143 miles from anchor up to anchor down, in 23 hours. Run's the word, too, as 120 miles of that was literally a run. It was too rolly to use the pole, or we'd have gotten here quicker :{))" We had a great run and run's the word. Didn't I tell you novices that Skippy was most likely running? Didn't I tell you that he was probably running to try to minimize the rolling that sailing with quartering seas would engender? But, noooooooooo! Did you fools listen to me? Not at all, it seems. But who is it that ended up having a correct assessment of the situation? Of, course it was I, as usual. It is due to my many years of sailing experience that I can pretty much guess what is going on when Skippy is attempting to sail offshore. And, where is the spinnaker I wonder, yes I do? I guess the Pig doesn't have one or the crew doesn't know how to fly one? All that hassle with the flopping roll-ups could have been avoided by leaving the damned useless heavy thing rolled up and setting a spinnaker instead. The mainsail should have been sheeted in pretty much flat to act as a damper to any rolling that an ill-designed underbody would cause. Did I not tell everybody that Skippy still has a lot to learn? Was I not correct in my assessment yet again? And not for the last time, BTW? Wilbur Hubbard Fly the kite with just 2-up? No thanks! The last spinnaker broach I experienced sailing 2-up was the last time my wife sailed with me, she gave up rather than subject herself to a cockpit full of cold sea water. Dennis. |
#5
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]() "Dennis Pogson" wrote in message ... Fly the kite with just 2-up? No thanks! The last spinnaker broach I experienced sailing 2-up was the last time my wife sailed with me, she gave up rather than subject herself to a cockpit full of cold sea water. Dennis. Well, you have been rather unlucky to have experienced a broach while she was aboard. When I had a 34 footer my wife was not all that keen on flying the kite with just the two of us aboard but finally we reached a compromise which enabled me to use the 'storm' spinnaker, and we used it for many miles although sometimes when the wind increased when we had it flying the question of getting it down without problems gave us some food for thought. Initially we flew it with a single sheet and guy (dipping pole type gybing). We even managed to gybe it but it was not easy as she was handling sheet and guy on two winches while steering with the tiller between her legs while I did the foredeck work. Then I installed two extra winches and added a lazy sheet and lazy guy. Big mistake! There was just too much for her to handle in the cockpit while steering as well. Now we have moved up toexactly the same sort of boat but she is 38 feet instead of 34. This makes a surprising difference to the size of the sails and although she came with four spinnakers of differing weights my wife will refuse to sail with me if I intend to try even the 'storm' one while there are just two of us. I agreed that with a mast height just short of 60'even the 'storm' spi looks pretty huge but pointed out that now we have an autopilot she can concentrate on sail handling in the cockpit. No joy there at all so spinnakers are out except when we have extra crew aboard. But the main thing is that we are still sailing together and as we have a very fast boat we are not actually loitering even when sailing downwind. Hope you can persuade your wife to give it another try by reaching a similar compromise. |
#6
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On Wed, 15 Oct 2008 16:19:07 +0200, "Edgar"
wrote: When I had a 34 footer my wife was not all that keen on flying the kite with just the two of us aboard but finally we reached a compromise which enabled me to use the 'storm' spinnaker, and we used it for many miles although sometimes when the wind increased when we had it flying the question of getting it down without problems gave us some food for thought. My wife and I always flew the spinnaker with just the two of us and an autopilot. It was fairly easy as long as we were well organized. For the douse we'd bear off dead down wind with the boom all the way out and collapse the chute behind the main. A good spinnaker sock can be useful also. We would sometimes jibe that way, dousing the chute with the sock on the original tack, dipping the pole over, jibing the main over and resetting on the new tack. Jibing in light air and flat water, we would bear away to DDW, center the spinnaker, center the main, dip the pole over, then jibe and ease the main. |
#7
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On 2008-10-15 17:50:11 -0400, Wayne.B said:
On Wed, 15 Oct 2008 16:19:07 +0200, "Edgar" wrote: When I had a 34 footer my wife was not all that keen on flying the kite with just the two of us aboard but finally we reached a compromise which enabled me to use the 'storm' spinnaker, and we used it for many miles although sometimes when the wind increased when we had it flying the question of getting it down without problems gave us some food for thought. My wife and I always flew the spinnaker with just the two of us and an autopilot. It was fairly easy as long as we were well organized. For the douse we'd bear off dead down wind with the boom all the way out and collapse the chute behind the main. A good spinnaker sock can be useful also. We would sometimes jibe that way, dousing the chute with the sock on the original tack, dipping the pole over, jibing the main over and resetting on the new tack. Jibing in light air and flat water, we would bear away to DDW, center the spinnaker, center the main, dip the pole over, then jibe and ease the main. I've been resisting this sub-thread, but can no longer resist. Xan ain't big, but her chutes are. The big one almost reaches the transom-mounted turning blocks when sheeted tightly. Pat may be onboard, but she is usually down below enjoying a good book while we fly the chute. Thus, I'm single-handing the cruising chute with Otto's help. With practice, flying a chute is just a bit more more difficult than a jib. Gybes could be a problem, but Otto gives us a nice smooth turn. At the proper point in the gybe, throw the main over, blow the now windward sheet, let the chute blow forward, then haul in on the new sheet. -- Jere Lull Xan-à-Deux -- Tanzer 28 #4 out of Tolchester, MD Xan's pages: http://web.mac.com/jerelull/iWeb/Xan/ Our BVI trips & tips: http://homepage.mac.com/jerelull/BVI/ |
#8
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]() "Jere Lull" wrote in message news:2008101601092950073-jerelull@maccom... On 2008-10-15 17:50:11 -0400, Wayne.B said: On Wed, 15 Oct 2008 16:19:07 +0200, "Edgar" wrote: When I had a 34 footer my wife was not all that keen on flying the kite with just the two of us aboard but finally we reached a compromise which enabled me to use the 'storm' spinnaker, and we used it for many miles although sometimes when the wind increased when we had it flying the question of getting it down without problems gave us some food for thought. My wife and I always flew the spinnaker with just the two of us and an autopilot. It was fairly easy as long as we were well organized. For the douse we'd bear off dead down wind with the boom all the way out and collapse the chute behind the main. A good spinnaker sock can be useful also. We would sometimes jibe that way, dousing the chute with the sock on the original tack, dipping the pole over, jibing the main over and resetting on the new tack. Jibing in light air and flat water, we would bear away to DDW, center the spinnaker, center the main, dip the pole over, then jibe and ease the main. I've been resisting this sub-thread, but can no longer resist. Xan ain't big, but her chutes are. The big one almost reaches the transom-mounted turning blocks when sheeted tightly. Pat may be onboard, but she is usually down below enjoying a good book while we fly the chute. Thus, I'm single-handing the cruising chute with Otto's help. With practice, flying a chute is just a bit more more difficult than a jib. Gybes could be a problem, but Otto gives us a nice smooth turn. At the proper point in the gybe, throw the main over, blow the now windward sheet, let the chute blow forward, then haul in on the new sheet. -- Jere Lull Xan-à-Deux -- Tanzer 28 #4 out of Tolchester, MD Xan's pages: http://web.mac.com/jerelull/iWeb/Xan/ Our BVI trips & tips: http://homepage.mac.com/jerelull/BVI/ Naturally the competence and experience of the lady in question play a major part in whether or not it is worth the risk. My wife was a relative newcomer to sailing at the time of said broach, and was not amused, despite my assurances that this was a regular occurrence in my racing career! What are the cockpit drains for anyway? Some years later, sailing 2-up on a 36-foot out-and-out racer, 3-quarter rigged, massive runners, checkstays, bendy mast, thin-as-string backstay, and with a rather-more-experienced (sailed since the age of 3) young lady on board, I regularly flew the kite in anything less than force 4, although the technique we developed was hardly in the how-to-sail books! I seem to remember she had very strong teeth! We would gybe the main first, letting the runners go, then sort out the foredeck, end-for-ending the pole on it's centred-span uphaul, whilst praying that the backstay would hold the mast upright despite the runners flapping loosely for a minute or so. Such manouevres are best performed if the helm has 4 arms, but as I said, a strong set of teeth is as good as a third arm. Swept back spreaders hadn't been invented! I doubt whether Skip and his good lady could handle their 47-footer in like manner, but a cruising chute would be an asset on such a boat. Dennis. |
#9
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
On Thu, 16 Oct 2008 05:09:28 GMT, Jere Lull wrote:
On 2008-10-15 17:50:11 -0400, Wayne.B said: On Wed, 15 Oct 2008 16:19:07 +0200, "Edgar" wrote: When I had a 34 footer my wife was not all that keen on flying the kite with just the two of us aboard but finally we reached a compromise which enabled me to use the 'storm' spinnaker, and we used it for many miles although sometimes when the wind increased when we had it flying the question of getting it down without problems gave us some food for thought. My wife and I always flew the spinnaker with just the two of us and an autopilot. It was fairly easy as long as we were well organized. For the douse we'd bear off dead down wind with the boom all the way out and collapse the chute behind the main. A good spinnaker sock can be useful also. We would sometimes jibe that way, dousing the chute with the sock on the original tack, dipping the pole over, jibing the main over and resetting on the new tack. Jibing in light air and flat water, we would bear away to DDW, center the spinnaker, center the main, dip the pole over, then jibe and ease the main. I've been resisting this sub-thread, but can no longer resist. Xan ain't big, but her chutes are. The big one almost reaches the transom-mounted turning blocks when sheeted tightly. Pat may be onboard, but she is usually down below enjoying a good book while we fly the chute. Thus, I'm single-handing the cruising chute with Otto's help. With practice, flying a chute is just a bit more more difficult than a jib. Gybes could be a problem, but Otto gives us a nice smooth turn. At the proper point in the gybe, throw the main over, blow the now windward sheet, let the chute blow forward, then haul in on the new sheet. Sounds familiar to me. I single hand often, and never think twice about whether to use the chute. If conditions call for it, I use it. An asym with a sock is not the same challenge as the old days. It's really not hard to manage at all. |
#10
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
"Edgar" wrote:
When I had a 34 footer my wife was not all that keen on flying the kite with just the two of us aboard but finally we reached a compromise which enabled me to use the 'storm' spinnaker, and we used it for many miles although sometimes when the wind increased when we had it flying the question of getting it down without problems gave us some food for thought. I can't figure my wife out, with regards to the spinnaker. Sometimes she really likes it, other times she does not. Last weekend we went for a very nice evening sail with another couple. The wind was light (about 6~7k) and as we headed back across the river, we were on a slightly-below-beam reach and I said "Do you think we can carry the spinnaker and still make it the right side of that marker?" The other couple were sailors and were game to try, my wife enjoyed getting the spinnaker rigged and when it was set, lay comfortably on the foredeck looking up at it, calling back advice on trim. It was a nice lazy sail and showed the boat's light air speed (we were going over 6 the whole time). And yet when things are getting really fun, she doesn't seem enthusiastic about flying it. Wayne.B wrote: My wife and I always flew the spinnaker with just the two of us and an autopilot. * It was fairly easy as long as we were well organized. For the douse we'd bear off dead down wind with the boom all the way out and collapse the chute behind the main. *A good spinnaker sock can be useful also. * We would sometimes jibe that way, dousing the chute with the sock on the original tack, dipping the pole over, jibing the main over and resetting on the new tack. * Jibing in light air and flat water, we would bear away to DDW, center the spinnaker, center the main, dip the pole over, then jibe and ease the main. Self-tailing winches are huge plus in situations like this. I'm getting some soon! Fresh Breezes- Doug King |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Trip Report - Gentlemen's Assateague Trip 2004 (long) | General | |||
Trip Report - Gentlemen's Assateague Trip 2004 (long) | Touring | |||
Trip Report - Gentlemen's Trip 2003 | General | |||
Trip Report - Gentlemen's Trip 2003 | Touring | |||
Here's a Trip report I wrote about a recent river trip I took. | Whitewater |