Home |
Search |
Today's Posts |
|
#1
![]() |
|||
|
|||
![]()
I realize that if your boat is large or small, it's obvious, but........
Which do you prefer for dinghy size in a Porta Bote ? Why ? Thank you, -- Courtney Thomas s/v Mutiny lying Oriental, NC WDB5619 |
#2
![]() |
|||
|
|||
![]()
Porta Boat came out with a square transom model a while back and I heard
that it is ok and can handle a small outboard.. Even if your going to paddle or row your boat now, there may come a day that you want to add an OB.. The older Porta Boats were pretty good and those who had them really liked them.. However, in the So Calif. marina where I was living on a mooring, my friend had one and the foam floatation pads began to deteriorated from constant exposure (he used it every day, kept it in the water.). Also some of the rivet that fastened things together corroded and he had to drill them out and put non corrosives in place. I would hope that the newer models would have over come these problems. The look funny and I can just visualize the thwarts popping out and the sides folding in on the oarsman (like a peapod or cacoon). However I never heard of any such instance. Just my sadistic imagination.. Steve s/v Good Intentions |
#3
![]() |
|||
|
|||
![]()
x-no-archive:yes "Steve" wrote:
Porta Boat came out with a square transom model a while back and I heard that it is ok and can handle a small outboard.. Even if your going to paddle or row your boat now, there may come a day that you want to add an OB.. We have an old 10 foot one (gotten 2nd hand from someone that had 2) and it does NOT have a square transom, but it DOES take an outboard. The older Porta Boats were pretty good and those who had them really liked them.. However, in the So Calif. marina where I was living on a mooring, my friend had one and the foam floatation pads began to deteriorated from constant exposure (he used it every day, kept it in the water.). Also some of the rivet that fastened things together corroded and he had to drill them out and put non corrosives in place. I would hope that the newer models would have over come these problems. They look funny and I can just visualize the thwarts popping out and the sides folding in on the oarsman (like a peapod or cacoon). However I never heard of any such instance. Just my sadistic imagination.. Steve s/v Good Intentions grandma Rosalie |
#4
![]() |
|||
|
|||
![]()
In article ,
Courtney Thomas wrote: I realize that if your boat is large or small, it's obvious, but........ Which do you prefer for dinghy size in a Porta Bote ? Why ? Thank you, The boat stows so easily, I don't think size choice is obvious. It depends on your intended use. We wanted ours for extended motoring about and possibly hauling lots of gear out to the anchorage, so got the 12 because the cost difference was trivial. It's wound up being the "water taxi" when a bunch of us are visiting around as it holds 5 adults comfortably. If we merely wanted to get the two of us to shore, the 8 would be fine. The smaller versions would be lighter to haul around, of course, but I don't have any trouble hauling it to deck single-handed with the chute halyard. -- Jere Lull Xan-a-Deux ('73 Tanzer 28 #4 out of Tolchester, MD) Xan's Pages: http://members.dca.net/jerelull/X-Main.html Our BVI FAQs (290+ pics) http://homepage.mac.com/jerelull/BVI/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Porta Bote too small? | General |