Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 430
Default Do you a have hydraulic start motor?

I use low pressure air on my little Detroit 3-53.
Steve

"Steve Lusardi" wrote in message
...
Bob,
I had a friend before he died that built a 60' concrete catch in Okinawa
and after the hull was finished took it to Yokohama to get the rig
installed. As he was motoring up the Ryukyu Island chain, the engine
overheated with a failed sal****er pump impeller. He stopped the engine,
changed the impeller as he had a spare and went to restart the engine, but
bilge water shorted the starter. The boat foundered, washed up on a coral
reef and was lost. Do you really want an electric starter? You have a
choice, hydraulic or air. Most hydraulic starters work off the front of
the crank shaft. They are VERY violent and unless the crank was designed
for this very high torque shock, it will shear the snout of the crank
clean off at the front main bearing. You have been warned! Now, air is a
different animal all together. It comes in 2 flavors high pressure and low
pressure. Low pressure =8 to 9 bar (130psi). High pressure = 12-15 bar.
Both systems are good, but require dual air storage and at least two
compressors,so this is big boat stuff because of the space requirement.
Steve

"Bob" wrote in message
...
Hi all:

Does anyone here have a hydraulic start engine in their sailboat? Id
especially like to hear from those with 50 HP.

Stuff like where ya got the starter or any reliability issues.
Bob





  #2   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 430
Default Do you a have hydraulic start motor?

By the way air start conversions are not bought across the parts counter.
They are not straight forward, especially for small engines. If small air
starters are made, I do not know of them. So, if anyone out there wants some
help on how to do it, contact me off-line. I don't think there is a great
interest in this NG for this topic.
Steve

"Steve Lusardi" wrote in message
...
I use low pressure air on my little Detroit 3-53.
Steve

"Steve Lusardi" wrote in message
...
Bob,
I had a friend before he died that built a 60' concrete catch in Okinawa
and after the hull was finished took it to Yokohama to get the rig
installed. As he was motoring up the Ryukyu Island chain, the engine
overheated with a failed sal****er pump impeller. He stopped the engine,
changed the impeller as he had a spare and went to restart the engine,
but bilge water shorted the starter. The boat foundered, washed up on a
coral reef and was lost. Do you really want an electric starter? You have
a choice, hydraulic or air. Most hydraulic starters work off the front of
the crank shaft. They are VERY violent and unless the crank was designed
for this very high torque shock, it will shear the snout of the crank
clean off at the front main bearing. You have been warned! Now, air is a
different animal all together. It comes in 2 flavors high pressure and
low pressure. Low pressure =8 to 9 bar (130psi). High pressure = 12-15
bar. Both systems are good, but require dual air storage and at least two
compressors,so this is big boat stuff because of the space requirement.
Steve

"Bob" wrote in message
...
Hi all:

Does anyone here have a hydraulic start engine in their sailboat? Id
especially like to hear from those with 50 HP.

Stuff like where ya got the starter or any reliability issues.
Bob







Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Converting pull cord motor into an electric start motor OldReliable General 1 December 18th 06 06:25 AM
Hydraulic pump/motor Question Michael Briggs Electronics 3 March 5th 06 05:25 AM
Hydraulic pump/motor Question Michael Briggs General 2 March 4th 06 08:57 PM
Hydraulic pump/motor Question Michael Briggs Boat Building 1 March 4th 06 08:40 PM


All times are GMT +1. The time now is 11:35 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017