On Sun, 6 Apr 2008 00:00:10 -0700 (PDT), Jay
wrote:

On Apr 5, 7:20*pm, "Wilbur Hubbard"
wrote:
"Bruce in Bangkok" wrote in messagenews:lhcgv3tmnc4on4g66bq3hhkhts27m6qgsn@4ax .com...

I hate to sound like an old man (even if I am) but in my younger days
a 5 H.P. motor was considered a "fishing boat" motor. A fishing boat
being a well built (i.e., heavy) wooden 14 - 16 foot boat. Now 'a days
it seems to take at least 50 H.P to push he same boat -- maybe the
horses are getting smaller?

In your younger days motors ran on steam!

Wilbur Hubbard

Bruce, was Wilbur being unkind to you? Actually, the horses
aren't getting smaller, it's just that the hardwiring in the brains of
some today can only produce one thought---there is no substitute for
having the biggest one in the group. Although they're talking about
their boat motors, we all know the basis for that psychological
affliction of only the biggest is the best. LOLOL But all we wanna
do is putt-putt-putt around the nice quiet, placid lake and soak up
some rays...no water skiing, no planing, no drag racing, no attempts
to cross the Pacific via Hawaii...just putt, putt, putt, putt, putt,
putt....................................so ya think the DF4 will do
that huh?

-Jay

Actually I have Willie-boy kill filed so the only time I see his
messages are when someone quotes him. Strangely, I don't miss him at
all :-)

No, when I was a young fella outboards were the thing.

I have seen an 18 ft. dory with an inboard, New Foundland built, one
cylinder engine with an external flywheel and crank, directly coupled
to the prop shaft . If you retarded the spark (and you were both
adroit and lucky) you could get the thing to stall and restart in
reverse. Probably a four H.P. engine and the guy was running abou100
lobster traps with the boat - pulling 50 traps a day -- by hand.

Funny how people used to get along without the SUV's and color TV. My
grandpa cut all the wood to heat a two bedroom house in upstate New
England, by himself. Took most of the month of September. With a hand
saw and an axe and he was in his 70's. Never owned a chain saw.

















Bruce-in-Bangkok
(correct email address for reply)

"Bruce in Bangkok" wrote in message
...
On Sun, 6 Apr 2008 00:00:10 -0700 (PDT), Jay
wrote:

On Apr 5, 7:20 pm, "Wilbur Hubbard"
wrote:
"Bruce in Bangkok" wrote in
messagenews:lhcgv3tmnc4on4g66bq3hhkhts27m6qgsn@4ax .com...

I hate to sound like an old man (even if I am) but in my younger days
a 5 H.P. motor was considered a "fishing boat" motor. A fishing boat
being a well built (i.e., heavy) wooden 14 - 16 foot boat. Now 'a days
it seems to take at least 50 H.P to push he same boat -- maybe the
horses are getting smaller?

In your younger days motors ran on steam!

Wilbur Hubbard

Bruce, was Wilbur being unkind to you? Actually, the horses
aren't getting smaller, it's just that the hardwiring in the brains of
some today can only produce one thought---there is no substitute for
having the biggest one in the group. Although they're talking about
their boat motors, we all know the basis for that psychological
affliction of only the biggest is the best. LOLOL But all we wanna
do is putt-putt-putt around the nice quiet, placid lake and soak up
some rays...no water skiing, no planing, no drag racing, no attempts
to cross the Pacific via Hawaii...just putt, putt, putt, putt, putt,
putt....................................so ya think the DF4 will do
that huh?

-Jay

Actually I have Willie-boy kill filed so the only time I see his
messages are when someone quotes him. Strangely, I don't miss him at
all :-)

No, when I was a young fella outboards were the thing.

I have seen an 18 ft. dory with an inboard, New Foundland built, one
cylinder engine with an external flywheel and crank, directly coupled
to the prop shaft . If you retarded the spark (and you were both
adroit and lucky) you could get the thing to stall and restart in
reverse. Probably a four H.P. engine and the guy was running abou100
lobster traps with the boat - pulling 50 traps a day -- by hand.

snip..

probably an old 'Make & Break' engine... once popular and a familiar sound
in the Maritimes and Newfoundland.
http://www.gasenginemagazine.com/complete-archive/3908/
http://museum.gov.ns.ca/fma/gallery-pages/aeng.html

On Sun, 6 Apr 2008 10:53:46 -0300, "Don White"
wrote:


"Bruce in Bangkok" wrote in message
.. .
On Sun, 6 Apr 2008 00:00:10 -0700 (PDT), Jay
wrote:

On Apr 5, 7:20 pm, "Wilbur Hubbard"
wrote:
"Bruce in Bangkok" wrote in
messagenews:lhcgv3tmnc4on4g66bq3hhkhts27m6qgsn@4ax .com...

I hate to sound like an old man (even if I am) but in my younger days
a 5 H.P. motor was considered a "fishing boat" motor. A fishing boat
being a well built (i.e., heavy) wooden 14 - 16 foot boat. Now 'a days
it seems to take at least 50 H.P to push he same boat -- maybe the
horses are getting smaller?

In your younger days motors ran on steam!

Wilbur Hubbard

Bruce, was Wilbur being unkind to you? Actually, the horses
aren't getting smaller, it's just that the hardwiring in the brains of
some today can only produce one thought---there is no substitute for
having the biggest one in the group. Although they're talking about
their boat motors, we all know the basis for that psychological
affliction of only the biggest is the best. LOLOL But all we wanna
do is putt-putt-putt around the nice quiet, placid lake and soak up
some rays...no water skiing, no planing, no drag racing, no attempts
to cross the Pacific via Hawaii...just putt, putt, putt, putt, putt,
putt....................................so ya think the DF4 will do
that huh?

-Jay

Actually I have Willie-boy kill filed so the only time I see his
messages are when someone quotes him. Strangely, I don't miss him at
all :-)

No, when I was a young fella outboards were the thing.

I have seen an 18 ft. dory with an inboard, New Foundland built, one
cylinder engine with an external flywheel and crank, directly coupled
to the prop shaft . If you retarded the spark (and you were both
adroit and lucky) you could get the thing to stall and restart in
reverse. Probably a four H.P. engine and the guy was running abou100
lobster traps with the boat - pulling 50 traps a day -- by hand.

snip..

probably an old 'Make & Break' engine... once popular and a familiar sound
in the Maritimes and Newfoundland.
http://www.gasenginemagazine.com/complete-archive/3908/
http://museum.gov.ns.ca/fma/gallery-pages/aeng.html

The second URL is the engine I remember (except it had a longer shaft
and no holes in the bock :-) From what some of the older fishermen
said they were the engine of choice at one time.


Bruce-in-Bangkok
(correct email address for reply)

Rats! I was hoping that at least one member of this group would have
had personal experience with the Suzuki portable outboards, especially
the 4hp and the 6hp to offer some insights as to their functionality,
endurance, noise level, trolling , etc. Haven't received too many
replies in the other boat group either so guess Suzuki's don't have
that many users. Thanx to the ones who responded though. Jay

On 2008-04-08 01:10:49 -0400, Jay said:

Rats! I was hoping that at least one member of this group would have
had personal experience with the Suzuki portable outboards, especially
the 4hp and the 6hp to offer some insights as to their functionality,
endurance, noise level, trolling , etc. Haven't received too many
replies in the other boat group either so guess Suzuki's don't have
that many users. Thanx to the ones who responded though. Jay

I don't have direct experience with them, but if you really are just
trolling around, the 4 will beat oars handily.

MY concern with any outboard is that you have adequate support where
you live and/or cruise. We have a wonderful ancient Honda, but no
dealers that I can get to without taking time off of work.

I'd feel safest with two nearby shops with good reputations, and at
least one day they're open past 5 PM.

--
Jere Lull
Tanzer 28 #4 out of Tolchester, MD
Xan's pages: http://web.mac.com/jerelull/iWeb/Xan/
Our BVI trips & tips: http://homepage.mac.com/jerelull/BVI/

On Apr 7, 10:58*pm, Jere Lull wrote:


Good point about having a good service shop nearby. And thanx for the
support of the 4HP. I've been leaning in that direction anyway. The
lakes we go to are pretty calm and, maybe I'm wrong, but I don't see a
lot of mechanical difference between the 4HP (DF4) and the 6HP (DF6).
It's like they're the same exact motor and the 6 just winds out more.
-Jay

Forgot to mention a harebrained (?) idea a friend of mine had. He
said to just putt-putt that 14 footer around these calm ponds in the
area all I would need would be the Suzuki 2.5 HP but that sounds more
like a motor for an inflatable, dinghy or a little 8 or 10 foot Walker
Bay to me.

He also mentioned that if I was going to shell out a $1100 for the
Suzuki DF4, I should pick up the Briggs and Stratton 5HP online for
$750 delivered. (One more horse at work for $350 less). Hmmmm...too
many damn decisions.
-Jay