| Home |
| Search |
| Today's Posts |
|
#10
|
|||
|
|||
Is 5200 or Sikaflex ok in potable water tanks
Great idea and alot easier than the PVC.
"Don W" wrote in message ... It is possible to weld plastic, but it takes some practice. I've had good luck using a hot glue gun for sealing holes in plastic tanks. The hot glue sticks are essentially a plastic with a low melting temperature. If you get everything clean and dry before applying the hot glue, and are careful, I think you will like the results. You can get a hot glue gun at Walmart, or Home Depot. YMMV Don W. MMC wrote: I wonder if a PVC welder would work for sealing holes like that? "dg" wrote in message ... Anyone know if 5200 or Sikafles type polyurethane adhesives are OK in potable water tanks as a small hole sealer. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Is 5200 or Sikaflex ok in potable water tanks - YES | Boat Building | |||
| Where to find ramp stories? | General | |||
| Fresh Water Tank | Cruising | |||
| Hot Water Dispenser | Cruising | |||
| Fresh Water System Design Ideas. | Boat Building | |||
Threaded Mode
