Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Aug 2006
Posts: 55
Default Safety rail attachments?

terry wrote:
Our 1970s Westerly Tiger has stainless steel safety rails/wires on
stanchions around the boat. At the attachment to the stern pulpit
each steel wire is fastened by a now dodgy looking (probably rotting) rope
tie. Wondering what is the reason for these ... To avoid having a metal
'loop' around the boat that 'might' affect
radio direction finding, if used, on the now old fashioned lower
frequencies, such as coastal beacons in the 'Long Wave' band or
broadcasting stations in the 'Medium Wave' or 'Broadcast; band.


The RDF explanation is the only one I've heard that appears even slightly
plausible. Of course the RDF/ADF scheme is by now of little interest to US
sailors and perhaps only marginally interesting to Europeans. There was for
a time talk about being able to cut the lifelines to bring an overboard crew
back on the boat. Cutting through lifeline bottle screws could take more
time.

--
Good luck and good sailing.
s/v Kerry Deare of Barnegat
http://home.comcast.net/~kerrydeare






  #2   Report Post  
posted to rec.boats.cruising
external usenet poster
 
First recorded activity by BoatBanter: Jul 2006
Posts: 116
Default Safety rail attachments?

Armond Perretta wrote:
terry wrote:

Our 1970s Westerly Tiger has stainless steel safety rails/wires on
stanchions around the boat. At the attachment to the stern pulpit
each steel wire is fastened by a now dodgy looking (probably rotting) rope
tie. Wondering what is the reason for these ... To avoid having a metal
'loop' around the boat that 'might' affect
radio direction finding, if used, on the now old fashioned lower
frequencies, such as coastal beacons in the 'Long Wave' band or
broadcasting stations in the 'Medium Wave' or 'Broadcast; band.



The RDF explanation is the only one I've heard that appears even slightly
plausible. Of course the RDF/ADF scheme is by now of little interest to US
sailors and perhaps only marginally interesting to Europeans. There was for
a time talk about being able to cut the lifelines to bring an overboard crew
back on the boat. Cutting through lifeline bottle screws could take more
time.

Several years ago I rebuilt an ICS Nav4 Navtex aerial. (a passive
vertical helix). When working properly and mounted clear of nearby
metalwork we were getting weather reports from Split and Caligari while
in Tunisian waters. With a shorted turn, range was reduced to basically
line of sight.

It would have been very unhappy with a shorted turn around the whole
boat. NAVTEX is IMHO another reason to retain the traditional guardwire
lashings.

--
Ian Malcolm. London, ENGLAND. (NEWSGROUP REPLY PREFERRED)
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & 32K emails -- NUL:
'Stingo' Albacore #1554 - 15' Early 60's, Uffa Fox designed,
All varnished hot moulded wooden racing dinghy.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Viewing Powerpoint Attachments With Thunderbird L D'Bonnie Tall Ship Photos 1 February 14th 08 10:05 PM
NL - Zhen Hua 10 grounded near Rotterdam with a load of containercranes - 2 attachments Jeronimus[_2_] Tall Ship Photos 3 February 5th 08 06:30 PM
Attachments/ Doug Thom Stewart ASA 3 March 25th 05 02:13 AM
File attachments and ORBCOMM (Was grib files) Joe Gruessing Electronics 0 May 18th 04 06:03 AM


All times are GMT +1. The time now is 08:31 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017