Watermakers and Chlorine -Correction for Steve D
 

Looks like you did my research for me.. I have been considering adding one
or two more membranes to my HRO sytem (it will handle up to 3 but currently
has only one).

The membrane prices look good to me, now I need to find the pressure
vessels. Do you have any recommendations or words of wisdom on these??

Steve
s/v Good Intentions

Watermakers and Chlorine -Correction for Steve D
 

Research is my middle name. :-)

There are two basic types. The white ones with black ends are made by
A&M Composites in Houston. They have about 90% of the US market. The
ones with the molded flair ends are made in Europe and are a good bit
more expensive.

Pacific RO has the best price I have found for the A&M vessels.
http://www.pacificro.com/DePress2.htm

You need the 1000 PSI 2.5x21 model at the bottom of the page. Hint:
They don't like working with end users so sound "official" when you
call. ;-) And don't mention my name. They got a little POed after
they visited my site and figured out I was not really a "dealer".

Steve wrote:

Looks like you did my research for me.. I have been considering adding one
or two more membranes to my HRO sytem (it will handle up to 3 but currently
has only one).

The membrane prices look good to me, now I need to find the pressure
vessels. Do you have any recommendations or words of wisdom on these??

Steve
s/v Good Intentions



--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com

Watermakers and Chlorine -Correction for Steve D
 

Research is my middle name. :-)

There are two basic types. The white ones with black ends are made by
A&M Composites in Houston. They have about 90% of the US market. The
ones with the molded flair ends are made in Europe and are a good bit
more expensive.

Pacific RO has the best price I have found for the A&M vessels.
http://www.pacificro.com/DePress2.htm

You need the 1000 PSI 2.5x21 model at the bottom of the page. Hint:
They don't like working with end users so sound "official" when you
call. ;-) And don't mention my name. They got a little POed after
they visited my site and figured out I was not really a "dealer".

Steve wrote:

Looks like you did my research for me.. I have been considering adding one
or two more membranes to my HRO sytem (it will handle up to 3 but currently
has only one).

The membrane prices look good to me, now I need to find the pressure
vessels. Do you have any recommendations or words of wisdom on these??

Steve
s/v Good Intentions



--
Glenn Ashmore

I'm building a 45' cutter in strip/composite. Watch my progress (or lack
there of) at: http://www.rutuonline.com
Shameless Commercial Division: http://www.spade-anchor-us.com