HDPE Water Tank
 

I'm looking for a custom fabricator of HDPE Poly for a water tank.
Anyone have any recommendations? Preferably in the NE, but nationwide
is ok. Thanks.

HDPE Water Tank
 

go to www.roncoplastics.com .... you might find a 'stock' tank that may
fit from there literally hundreds tanks in inventory.

Also consider a HDPE lined GRP tank from a specialty fabricator. There
has been quite a lot of advances in prebonding HDPE to fiberglass
sheeting, the fabricator then plastic welds the joints and spark tests
them for accuracy, then reinforces the backing joint surfaces with
additional GRP -- this method of HDPE construction is starting to show
up in the high pure chem. industry with 'reasonable' results.

In article , Marc
wrote:

I'm looking for a custom fabricator of HDPE Poly for a water tank.
Anyone have any recommendations? Preferably in the NE, but nationwide
is ok. Thanks.

HDPE Water Tank
 

go to www.roncoplastics.com .... you might find a 'stock' tank that may
fit from there literally hundreds tanks in inventory.

Also consider a HDPE lined GRP tank from a specialty fabricator. There
has been quite a lot of advances in prebonding HDPE to fiberglass
sheeting, the fabricator then plastic welds the joints and spark tests
them for accuracy, then reinforces the backing joint surfaces with
additional GRP -- this method of HDPE construction is starting to show
up in the high pure chem. industry with 'reasonable' results.

In article , Marc
wrote:

I'm looking for a custom fabricator of HDPE Poly for a water tank.
Anyone have any recommendations? Preferably in the NE, but nationwide
is ok. Thanks.

HDPE Water Tank
 

"Marc" wrote in message
...
I'm looking for a custom fabricator of HDPE Poly for a water tank.
Anyone have any recommendations? Preferably in the NE, but nationwide
is ok. Thanks.

Hi Marc. Try Shirlon Plastics, located in Cambridge, Ontario.

www.shirlonplastics.com

They have good prices and their quality is excellent. Many boat and RV
companies use their tanks.

Jim Carter
"The Boat"
Bayfield

HDPE Water Tank
 

"Marc" wrote in message
...
I'm looking for a custom fabricator of HDPE Poly for a water tank.
Anyone have any recommendations? Preferably in the NE, but nationwide
is ok. Thanks.

Hi Marc. Try Shirlon Plastics, located in Cambridge, Ontario.

www.shirlonplastics.com

They have good prices and their quality is excellent. Many boat and RV
companies use their tanks.

Jim Carter
"The Boat"
Bayfield

HDPE Water Tank
 

"Rich Hampel" wrote in message
...
go to www.roncoplastics.com .... you might find a 'stock' tank that may
fit from there literally hundreds tanks in inventory.

Also consider a HDPE lined GRP tank from a specialty fabricator. There
has been quite a lot of advances in prebonding HDPE to fiberglass
sheeting, the fabricator then plastic welds the joints and spark tests
them for accuracy, then reinforces the backing joint surfaces with
additional GRP -- this method of HDPE construction is starting to show
up in the high pure chem. industry with 'reasonable' results.

In article , Marc
wrote:

I'm looking for a custom fabricator of HDPE Poly for a water tank.
Anyone have any recommendations? Preferably in the NE, but nationwide
is ok. Thanks.

HDPE Water Tank
 

"Rich Hampel" wrote in message
...
go to www.roncoplastics.com .... you might find a 'stock' tank that may
fit from there literally hundreds tanks in inventory.

Also consider a HDPE lined GRP tank from a specialty fabricator. There
has been quite a lot of advances in prebonding HDPE to fiberglass
sheeting, the fabricator then plastic welds the joints and spark tests
them for accuracy, then reinforces the backing joint surfaces with
additional GRP -- this method of HDPE construction is starting to show
up in the high pure chem. industry with 'reasonable' results.

In article , Marc
wrote:

I'm looking for a custom fabricator of HDPE Poly for a water tank.
Anyone have any recommendations? Preferably in the NE, but nationwide
is ok. Thanks.

HDPE Water Tank
 

I had some new tanks made by these guys last summer that I'm very happy
with: http://www.dura-weld.com/

I'm looking for a custom fabricator of HDPE Poly for a water tank.
Anyone have any recommendations? Preferably in the NE, but nationwide
is ok. Thanks.
--
Dan Best - (707) 431-1662, Healdsburg, CA 95448
B-2/75 1977-1979
Tayana 37 #192, "Tricia Jean"
http://rangerbest.home.comcast.net/TriciaJean.JPG

HDPE Water Tank
 

I had some new tanks made by these guys last summer that I'm very happy
with: http://www.dura-weld.com/

I'm looking for a custom fabricator of HDPE Poly for a water tank.
Anyone have any recommendations? Preferably in the NE, but nationwide
is ok. Thanks.
--
Dan Best - (707) 431-1662, Healdsburg, CA 95448
B-2/75 1977-1979
Tayana 37 #192, "Tricia Jean"
http://rangerbest.home.comcast.net/TriciaJean.JPG

HDPE Water Tank
 

wrote:
If you really don't need a custom tank, this fellow can also probably
sell you a stock tank from Ronco for a better price than going direct.

That would be highly unlikely, since Ronco's price is about half what
any of their dealers have to charge. Otoh, it never hurts to ask.

--
Peggie
----------
Peggie Hall
Specializing in marine sanitation since 1987
Author "Get Rid of Boat Odors - A Guide To Marine Sanitation Systems and
Other Sources of Aggravation and Odor"
http://www.seaworthy.com/html/get_ri...oat_odors.html