![]() |
Replacing a Bimini with a Hardtop
Any comments or suggestions on replacing a bimini-dodger with a fiberglass
hardtop? I am in the initial planning stages and looking for input. Thanks |
Replacing a Bimini with a Hardtop
I've been thinking about a hard dodger, too.
There are a couple of aftermarket sources that are essentially fiberglass "roofs" held up with tubular stainless frames. You still have fabric for the side panels and the front. I don't really see the point. Someone built, photographed, and posted a "stitch and glue" hard dodger. If you aren't familiar with the term, it means plywood panels that are tabbed together with resin and fiberglass cloth, then painted. The pictures are easy to find with google or Yahoo! by searching for "stitch and glue dodger". I think it looks terrible, but it may inspire you to do something better. The best looking one I've ever seen--from a distance anyway--is on Sue and Larry's restored Formosa Peterson, "Serengeti." Sue and Larry are sailing authors who regularly contribute to sailnet.com, and there are many pictures of their boat attached to their articles. The reason I like their hard dodger the best is because the dodger and bimini are one long, continuous piece covers the entire cockpit and is large enough to put a whole boatload of solar panels on. It also has a hard windshield. Visit sailnet.com and search for "hard dodger" and you'll see it. I've done some pencil sketches of my own version of Sue and Larry's design, I think it's doable but quite the project. I guess if Larry can do it so could I, but I notice that they never wrote an article about the dodger and they never show it close up. So, they may be unhappy with their workmanship. Next time I order a custom yacht, I'm getting one for sure (yeah, right). |
Replacing a Bimini with a Hardtop
I've been thinking about a hard dodger, too.
There are a couple of aftermarket sources that are essentially fiberglass "roofs" held up with tubular stainless frames. You still have fabric for the side panels and the front. I don't really see the point. Someone built, photographed, and posted a "stitch and glue" hard dodger. If you aren't familiar with the term, it means plywood panels that are tabbed together with resin and fiberglass cloth, then painted. The pictures are easy to find with google or Yahoo! by searching for "stitch and glue dodger". I think it looks terrible, but it may inspire you to do something better. The best looking one I've ever seen--from a distance anyway--is on Sue and Larry's restored Formosa Peterson, "Serengeti." Sue and Larry are sailing authors who regularly contribute to sailnet.com, and there are many pictures of their boat attached to their articles. The reason I like their hard dodger the best is because the dodger and bimini are one long, continuous piece covers the entire cockpit and is large enough to put a whole boatload of solar panels on. It also has a hard windshield. Visit sailnet.com and search for "hard dodger" and you'll see it. I've done some pencil sketches of my own version of Sue and Larry's design, I think it's doable but quite the project. I guess if Larry can do it so could I, but I notice that they never wrote an article about the dodger and they never show it close up. So, they may be unhappy with their workmanship. Next time I order a custom yacht, I'm getting one for sure (yeah, right). |
Replacing a Bimini with a Hardtop
x-no-archive:yes
"Rick & Linda Bernard" wrote: Any comments or suggestions on replacing a bimini-dodger with a fiberglass hardtop? I am in the initial planning stages and looking for input. Bob wants to do this too. I hope I've headed him off. I suggested that it be one that would collapse down to make a cockpit cover when we take off the excess canvas pre-hurricane or pre-haul by the yard. There would be some engineering involved I guess. People that have done this on our boats have put up that hard tubing frame with a canvas top - the frame is stationary rather than collapsing like ours does, and the canvas laces on. That seems like the worst of both worlds to me. I like to have a dodger than I can take out to let air flow through the boat, and pull down in case the air is cold or has lots of big particles of water in it. http://www.thetwocaptains.com/engine_room/volume5.htm shows one that was made in Trinidad. grandma Rosalie S/V RosalieAnn, Leonardtown, MD CSY 44 WO #156 http://home.mindspring.com/~gmbeasley/id2.html |
Replacing a Bimini with a Hardtop
x-no-archive:yes
"Rick & Linda Bernard" wrote: Any comments or suggestions on replacing a bimini-dodger with a fiberglass hardtop? I am in the initial planning stages and looking for input. Bob wants to do this too. I hope I've headed him off. I suggested that it be one that would collapse down to make a cockpit cover when we take off the excess canvas pre-hurricane or pre-haul by the yard. There would be some engineering involved I guess. People that have done this on our boats have put up that hard tubing frame with a canvas top - the frame is stationary rather than collapsing like ours does, and the canvas laces on. That seems like the worst of both worlds to me. I like to have a dodger than I can take out to let air flow through the boat, and pull down in case the air is cold or has lots of big particles of water in it. http://www.thetwocaptains.com/engine_room/volume5.htm shows one that was made in Trinidad. grandma Rosalie S/V RosalieAnn, Leonardtown, MD CSY 44 WO #156 http://home.mindspring.com/~gmbeasley/id2.html |
Replacing a Bimini with a Hardtop
"Paul" wrote in message
m... The best looking one I've ever seen--from a distance anyway--is on Sue and Larry's restored Formosa Peterson, "Serengeti." Sue and Larry are sailing authors who regularly contribute to sailnet.com, and there are many pictures of their boat attached to their articles. The reason I like their hard dodger the best is because the dodger and bimini are one long, continuous piece covers the entire cockpit and is large enough to put a whole boatload of solar panels on. It also has a hard windshield. Visit sailnet.com and search for "hard dodger" and you'll see it. I've done some pencil sketches of my own version of Sue and Larry's design, I think it's doable but quite the project. I guess if Larry can do it so could I, but I notice that they never wrote an article about the dodger and they never show it close up. So, they may be unhappy with their workmanship. They did, indeed, write up about it. Estimated that they had over 1000 hours of labor in it, and over 5k of money. I archived the article, I think - they talked about it in one of their solar articles... Meanwhile, I'm about to buy one with a 10x12 HT, but with all removable panels that also have zipouts for short-term removal. You can get a better look at www.justpickone.org/skip/gallery and click on hightime. One of our anticipated upgrades is to cover it in solar panels - but another of my correspondents, from the SSCA lists, has had excellent luck with just one solar and one wind generator, usually keeping his 800AH of batteries fully charged, so I'm thinking about that, as expensive as solar is for the amount of amps it produces. L8R Skip -- "And then again, when you sit at the helm of your little ship on a clear night, and gaze at the countless stars overhead, and realize that you are quite alone on a great, wide sea, it is apt to occur to you that in the general scheme of things you are merely an insignificant speck on the surface of the ocean; and are not nearly so important or as self-sufficient as you thought you were. Which is an exceedingly wholesome thought, and one that may effect a permanent change in your deportment that will be greatly appreciated by your friends."- James S. Pitkin |
Replacing a Bimini with a Hardtop
"Paul" wrote in message
m... The best looking one I've ever seen--from a distance anyway--is on Sue and Larry's restored Formosa Peterson, "Serengeti." Sue and Larry are sailing authors who regularly contribute to sailnet.com, and there are many pictures of their boat attached to their articles. The reason I like their hard dodger the best is because the dodger and bimini are one long, continuous piece covers the entire cockpit and is large enough to put a whole boatload of solar panels on. It also has a hard windshield. Visit sailnet.com and search for "hard dodger" and you'll see it. I've done some pencil sketches of my own version of Sue and Larry's design, I think it's doable but quite the project. I guess if Larry can do it so could I, but I notice that they never wrote an article about the dodger and they never show it close up. So, they may be unhappy with their workmanship. They did, indeed, write up about it. Estimated that they had over 1000 hours of labor in it, and over 5k of money. I archived the article, I think - they talked about it in one of their solar articles... Meanwhile, I'm about to buy one with a 10x12 HT, but with all removable panels that also have zipouts for short-term removal. You can get a better look at www.justpickone.org/skip/gallery and click on hightime. One of our anticipated upgrades is to cover it in solar panels - but another of my correspondents, from the SSCA lists, has had excellent luck with just one solar and one wind generator, usually keeping his 800AH of batteries fully charged, so I'm thinking about that, as expensive as solar is for the amount of amps it produces. L8R Skip -- "And then again, when you sit at the helm of your little ship on a clear night, and gaze at the countless stars overhead, and realize that you are quite alone on a great, wide sea, it is apt to occur to you that in the general scheme of things you are merely an insignificant speck on the surface of the ocean; and are not nearly so important or as self-sufficient as you thought you were. Which is an exceedingly wholesome thought, and one that may effect a permanent change in your deportment that will be greatly appreciated by your friends."- James S. Pitkin |
Replacing a Bimini with a Hardtop
On Mon, 9 Feb 2004 18:11:56 -0600, "Rick & Linda Bernard" wrote:
Any comments or suggestions on replacing a bimini-dodger with a fiberglass hardtop? I am in the initial planning stages and looking for input. Thanks Maybe it's just me, but..... The last time I sailed, it was on a Catalina 36 with a full dodger.... top, front, sides..all except the back. Folks, I got seasick for the first time sailing...actually motoring. The "station wagon effect" allowed the exhaust to flood the cockpit. I went forward on the deck several times, and that calmed my stomach. Is this common? Or is it a dodger design problem? Any advice how to minimize the effect? Short of motoring in reverse? Thanks, Norm |
Replacing a Bimini with a Hardtop
On Mon, 9 Feb 2004 18:11:56 -0600, "Rick & Linda Bernard" wrote:
Any comments or suggestions on replacing a bimini-dodger with a fiberglass hardtop? I am in the initial planning stages and looking for input. Thanks Maybe it's just me, but..... The last time I sailed, it was on a Catalina 36 with a full dodger.... top, front, sides..all except the back. Folks, I got seasick for the first time sailing...actually motoring. The "station wagon effect" allowed the exhaust to flood the cockpit. I went forward on the deck several times, and that calmed my stomach. Is this common? Or is it a dodger design problem? Any advice how to minimize the effect? Short of motoring in reverse? Thanks, Norm |
Replacing a Bimini with a Hardtop
"engsol" wrote in message ... On Mon, 9 Feb 2004 18:11:56 -0600, "Rick & Linda Bernard" wrote: Any comments or suggestions on replacing a bimini-dodger with a fiberglass hardtop? I am in the initial planning stages and looking for input. Thanks Maybe it's just me, but..... The last time I sailed, it was on a Catalina 36 with a full dodger.... top, front, sides..all except the back. Folks, I got seasick for the first time sailing...actually motoring. The "station wagon effect" allowed the exhaust to flood the cockpit. I went forward on the deck several times, and that calmed my stomach. Is this common? Or is it a dodger design problem? Any advice how to minimize the effect? Short of motoring in reverse? Thanks, Norm I wouldn't have a fully enclosed solid or fabric dodger /bimini but I sail mainly in the tropics. The effect of shade, whether it be from solid or cloth is essential on a cruising boat that is in warmer areas. Enclosing the cockpit with a full dodger soon becomes oppressive and we do it only in rain or a particularly cold winter beeze- here in Queensland/Australia that means well above freezing. My boat has a fabric bimini which can be fully enclosed with a plastic windscreen and fabric curtains. The windscreen has a small area just in front of the helmsman that unzips for visibility in bad conditions. This works very well on my boat in my conditions. I wouldn't mind a solid bimini but I couldn't tolerate solid windscreen and side panels in the heat. If sailing only in colder conditions this may be acceptible. Peter HK |
All times are GMT +1. The time now is 11:09 PM. |
Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com