Home |
Search |
Today's Posts |
#9
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]() "Wayne.B" wrote I've had good luck with Biobor. That's the stuff I almost bought. Do you just pour it in the tank before filling? I was buying just before I needed to fill the tank. The print on the Biobor Jr. bottle was so small that, even with my glasses, I could only make out a few phrases that looked like, "full protective clothing", "pre mix with (some quantity) of fuel", etc. It was the latter that really made up my mind because I didn't have time to arrange the necessary containers and means of transfer. The StarTron says that there is absolutely no risk of interaction with other fuel treatments. (If the PRI people are correct, that's easy to believe.) I could still try Biobor when I use up the next half tank. Another question: Does the alge sludge get through the primary filter? I plan to put a vacuum gauge in my fuel line the next time I open up the fuel system. However, my secondary filter is downstream of both fuel pumps so I can't put a gauge on that one unless it was a pressure gauge just before the filter. -- Roger Long |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Lou Dobbs May Soon Get the 'Don Imus Treatment' | General | |||
Nautical treatment of BDS | General | |||
ALGE strip?? | General |