Unfortunately that fuel clogs up the filters. That is the entire problem.
Having clean fuel in the engine fuel system avoids the problem.

Doug

"jlp2550" wrote in message
...
Why not use the engine to do it - most diesels pump 3-4 times what
they use and return it. I have a selector valve on the return to
select which tank I want it back in.


On Tue, 25 Nov 2003 17:49:20 -0500, "Doug Dotson"
wrote:

I am designing a fuel polishing and transfer system. My thought
is to use valves to route fuel from any tank to any tank. No
problem with that part. I want to be able to just transfer fuel
or switch in a filter to polish the fuel while transferring. Since
I can select the same tank for source and destination, I can
polish fuel in place as well. The problem comes with the selection
of a pump. I was looking at a Groco or Jabsco pump which seems
good for transfer purposes, but way exceeds the flowrate of the
filter when polishing. A Walbro fuel pump (which I have as a priming
pump now) seems like a good fit for polishing (33 GPH) but will be slow
when just transferring fuel. What happens when a 5.5 GPM pump
(Jabsco) is pushing fuel through a filter rated at 60 GPH (RACOR 500)?

Thanks!
Doug
s/v Callista