Anything wrong with this battery wiring setup?
 

On Sun, 15 Jul 2007 00:20:51 +0000, Larry wrote:

Brian Whatcott wrote in
:

http://www.flickr.com/photos/brian_w/803117449/

And...if you want multiple stations to control the winch, you simply put
one rotary switch marked for each station in the common terminal of each
station's switch so that only ONE station will have power to this common
contact at a time. Only one station will work at a time with no danger of
one keying the up and the other keying the down simultaneously....better
control for the winch operator.

Safety-wise, this would also mean that if the rotary switch were pointing
at the footswitch on the bow, some STUPID couldn't wind your fingers into
the winch by pressing UP at the station of the helm. It would be even
safer if the rotary switch were a KEYSWITCH and you took the key with you
on your way to the bow to operate the winch so STUPID couldn't turn the
switch to his/her station. That would be the ultimate control....(c;

They're YOUR fingers.....right??

Larry

Here's a cheesy diagram - rev1 - of how multi-station control looks

http://www.flickr.com/photos/brian_w/813216003/

Brian Whatcott Altus OK

Anything wrong with this battery wiring setup?
 

Brian Whatcott wrote in
:

http://www.flickr.com/photos/brian_w/813216003/

I was hopin' for a little more class, by now. Maybe some nice AutoCAD
panels in a Powerpoint presentation.....hee hee.

Larry
--
While in Mexico, I didn't have to press 1 for Spanish.
While in Iran, I didn't have to press 1 for Farsi, either.
It just isn't fair.

Anything wrong with this battery wiring setup?
 

On Sun, 15 Jul 2007 02:40:43 +0000, Larry wrote:

Brian Whatcott wrote in
:

http://www.flickr.com/photos/brian_w/813216003/

I was hopin' for a little more class, by now. Maybe some nice AutoCAD
panels in a Powerpoint presentation.....hee hee.

Larry


I didn't even mention the coil stoppers, the positive interlock, the
overcurrent resettable fuse...etc.... :-)

Brian W

Anything wrong with this battery wiring setup?
 

Brian Whatcott wrote in
:

I didn't even mention the coil stoppers, the positive interlock, the
overcurrent resettable fuse...etc.... :-)

Brian W



If we make it complex enough....it won't float...(c;

Larry
--
While in Mexico, I didn't have to press 1 for Spanish.
While in Iran, I didn't have to press 1 for Farsi, either.
It just isn't fair.