Hi,
Does anyone know where I could get an MDII B manual? Downloadable
would be preferred since I need it soon. Mainly, I need the instructions
on bleeding air out that has gotten into the fuel line and injectors.

In dire need, have to move the boat soon and air got in when I was changing
out the old fuel, installing filters and installing a diesel heater. Getting
ready
to move to a new marina where I have a live-aboard slip. Projects have been
necessarily speeded up.

thanks
Mark

I have the manual for the MD2B on my web site at
http://hood.hctc.com/~esteve/private/manuals/

I hope that it will be of some help..

Steve
s/v Good Intentions

I am constantly amazed at the depth of assistance available in this
newsgroup.

"Steve" wrote in message
...
I have the manual for the MD2B on my web site at
http://hood.hctc.com/~esteve/private/manuals/

I hope that it will be of some help..

Steve
s/v Good Intentions

I am constantly amazed at the depth of assistance available in this
newsgroup.

"Steve" wrote in message
...
I have the manual for the MD2B on my web site at
http://hood.hctc.com/~esteve/private/manuals/

I hope that it will be of some help..

Steve
s/v Good Intentions

I have the manual for the MD2B on my web site at
http://hood.hctc.com/~esteve/private/manuals/

I hope that it will be of some help..

Steve
s/v

Hmmm, I couldn't download it. Any tips?
Or could you send it on email? Can't figure out why it wouldn't load on AOL
and I do have acrobat.

Thanks, the shop manual is what I need
and would fit the bill nicely, I just wasn't
able to get it off the site.

Mark

"MLapla4120" wrote in message
...

I have the manual for the MD2B on my web site at
http://hood.hctc.com/~esteve/private/manuals/

I hope that it will be of some help..

Steve
s/v

Hmmm, I couldn't download it. Any tips?
Or could you send it on email? Can't figure out why it wouldn't load on AOL
and I do have acrobat.

Thanks, the shop manual is what I need
and would fit the bill nicely, I just wasn't
able to get it off the site.

Mark

Or could you send it on email? Can't figure out why it wouldn't load on AOL
and I do have acrobat.

Thanks, the shop manual is what I need
and would fit the bill nicely, I just wasn't
able to get it off the site.

I have one for the MD-11 that is no longer needed but for the C/D models.
If you think you could use it. I will send it along.

Leanne
S/V Fundy

"MLapla4120" wrote in message
...

I have the manual for the MD2B on my web site at
http://hood.hctc.com/~esteve/private/manuals/

I hope that it will be of some help..

Steve
s/v

Hmmm, I couldn't download it. Any tips?
Or could you send it on email? Can't figure out why it wouldn't load on AOL
and I do have acrobat.

Thanks, the shop manual is what I need
and would fit the bill nicely, I just wasn't
able to get it off the site.

Mark

Or could you send it on email? Can't figure out why it wouldn't load on AOL
and I do have acrobat.

Thanks, the shop manual is what I need
and would fit the bill nicely, I just wasn't
able to get it off the site.

I have one for the MD-11 that is no longer needed but for the C/D models.
If you think you could use it. I will send it along.

Leanne
S/V Fundy

I have the manual for the MD2B on my web site at
http://hood.hctc.com/~esteve/private/manuals/

I hope that it will be of some help..

Steve
s/v

Hmmm, I couldn't download it. Any tips?
Or could you send it on email? Can't figure out why it wouldn't load on AOL
and I do have acrobat.

Thanks, the shop manual is what I need
and would fit the bill nicely, I just wasn't
able to get it off the site.

Mark