Bottom painting
 

Practical Sailor just had a letter about boatyards not letting ppl do
their own bottom painting but still charging an arm and leg to have
the yard do it. My experience is that yards do a crappy job with
almost no surface preparation except for a pressure wash. The few
times I have allowed a yard to do it was a waste of money as it fouled
in less than 3 months. 6 years ago, I hauled my boat and sanded the
bottom, applied 3 coats of hard CuO based paint (BottomKote or
something like that)and suddenly had to stop sailing due to business
problems. My boat sat for 4 years being used very little in a place
that fouled heavily. Finally, I had her hauled to be brought to my
home and was amazed to find NO fouling at all. A boat next to mine
was so heavily fouled it grew oysters. I know from some past
experience that my own bottomcoating job is superior to that done by
the yardss but this was amazing. Did I do something right or just get
lucky?

Bottom painting
 

Parallax wrote:

Practical Sailor just had a letter about boatyards not letting ppl do
their own bottom painting but still charging an arm and leg to have
the yard do it. My experience is that yards do a crappy job with
almost no surface preparation except for a pressure wash. The few
times I have allowed a yard to do it was a waste of money as it fouled
in less than 3 months. 6 years ago, I hauled my boat and sanded the
bottom, applied 3 coats of hard CuO based paint (BottomKote or
something like that)and suddenly had to stop sailing due to business
problems. My boat sat for 4 years being used very little in a place
that fouled heavily. Finally, I had her hauled to be brought to my
home and was amazed to find NO fouling at all. A boat next to mine
was so heavily fouled it grew oysters. I know from some past
experience that my own bottomcoating job is superior to that done by
the yardss but this was amazing. Did I do something right or just get
lucky?


From my experience, yards will use the cheapest formulation that works
in their area most years. Frankly, that makes sense.

On our first moored boat, I didn't know anything and paid the yard to do
the bottom at the start of a particularly bad year. Within a month, the
growth was almost 2" thick. They hauled, scraped and recoated the bottom
with something better at their cost.

Since, I've applied Practical Sailor's recommendations and have had
essentially no growth survive the powerwashing.

One year, as a test, I didn't overcoat our "hard" paint (supposedly it
was "dead" after 6 months' exposure to air. Little survived the
powerwashing, but there were a few carcasses of hard growth.

I few years ago, I started using an ablative paint and haven't had hard
growth survive powerwashing except where I didn't touch up the hard
paint showing through (another test). This time, I put two coats at the
waterline, a single coat below. We'll see how things worked this year,
though of course I don't know how hard our powerwash guy works.

--
Jere Lull
Xan-a-Deux ('73 Tanzer 28 #4 out of Tolchester, MD)
Xan's Pages: http://members.dca.net/jerelull/X-Main.html
Our BVI FAQs (290+ pics) http://homepage.mac.com/jerelull/BVI/

Bottom painting
 

Although you mentioned copper based paint, 6 years ago you might of had
the last of the TIN based stuff (original Micro 44 etc) I used to get
2 years + with that paint. It was so good I rarely got barnacles on my
wheels even though the paint would not stick to the wheels (Just the
poison in the water I guess) It is now illegal except for large
commercial vessels (With better lobbyists)



Parallax wrote:
Practical Sailor just had a letter about boatyards not letting ppl do
their own bottom painting but still charging an arm and leg to have
the yard do it. My experience is that yards do a crappy job with
almost no surface preparation except for a pressure wash. The few
times I have allowed a yard to do it was a waste of money as it fouled
in less than 3 months. 6 years ago, I hauled my boat and sanded the
bottom, applied 3 coats of hard CuO based paint (BottomKote or
something like that)and suddenly had to stop sailing due to business
problems. My boat sat for 4 years being used very little in a place
that fouled heavily. Finally, I had her hauled to be brought to my
home and was amazed to find NO fouling at all. A boat next to mine
was so heavily fouled it grew oysters. I know from some past
experience that my own bottomcoating job is superior to that done by
the yardss but this was amazing. Did I do something right or just get
lucky?

Bottom painting
 

Ed wrote in message ...
Although you mentioned copper based paint, 6 years ago you might of had
the last of the TIN based stuff (original Micro 44 etc) I used to get
2 years + with that paint. It was so good I rarely got barnacles on my
wheels even though the paint would not stick to the wheels (Just the
poison in the water I guess) It is now illegal except for large
commercial vessels (With better lobbyists)



Even I am afraid of that tin based stuff so I know it said 68% CuO.



Parallax wrote:
Practical Sailor just had a letter about boatyards not letting ppl do
their own bottom painting but still charging an arm and leg to have
the yard do it. My experience is that yards do a crappy job with
almost no surface preparation except for a pressure wash. The few
times I have allowed a yard to do it was a waste of money as it fouled
in less than 3 months. 6 years ago, I hauled my boat and sanded the
bottom, applied 3 coats of hard CuO based paint (BottomKote or
something like that)and suddenly had to stop sailing due to business
problems. My boat sat for 4 years being used very little in a place
that fouled heavily. Finally, I had her hauled to be brought to my
home and was amazed to find NO fouling at all. A boat next to mine
was so heavily fouled it grew oysters. I know from some past
experience that my own bottomcoating job is superior to that done by
the yardss but this was amazing. Did I do something right or just get
lucky?

Bottom painting
 

Besides Practical Sailor, can anyone suggest a good "how-to" book or article
(particularly for a beginner) dealing with the application of bottom paint
and other maintenance procedures?

Steve H.

"Parallax" wrote in message
om...
Practical Sailor just had a letter about boatyards not letting ppl do
their own bottom painting but still charging an arm and leg to have
the yard do it. My experience is that yards do a crappy job with
almost no surface preparation except for a pressure wash. The few
times I have allowed a yard to do it was a waste of money as it fouled
in less than 3 months. 6 years ago, I hauled my boat and sanded the
bottom, applied 3 coats of hard CuO based paint (BottomKote or
something like that)and suddenly had to stop sailing due to business
problems. My boat sat for 4 years being used very little in a place
that fouled heavily. Finally, I had her hauled to be brought to my
home and was amazed to find NO fouling at all. A boat next to mine
was so heavily fouled it grew oysters. I know from some past
experience that my own bottomcoating job is superior to that done by
the yardss but this was amazing. Did I do something right or just get
lucky?

Bottom painting
 

Besides Practical Sailor, can anyone suggest a good "how-to" book or article
(particularly for a beginner) dealing with the application of bottom paint
and other maintenance procedures?

Steve H.

"Parallax" wrote in message
om...
Practical Sailor just had a letter about boatyards not letting ppl do
their own bottom painting but still charging an arm and leg to have
the yard do it. My experience is that yards do a crappy job with
almost no surface preparation except for a pressure wash. The few
times I have allowed a yard to do it was a waste of money as it fouled
in less than 3 months. 6 years ago, I hauled my boat and sanded the
bottom, applied 3 coats of hard CuO based paint (BottomKote or
something like that)and suddenly had to stop sailing due to business
problems. My boat sat for 4 years being used very little in a place
that fouled heavily. Finally, I had her hauled to be brought to my
home and was amazed to find NO fouling at all. A boat next to mine
was so heavily fouled it grew oysters. I know from some past
experience that my own bottomcoating job is superior to that done by
the yardss but this was amazing. Did I do something right or just get
lucky?

Bottom painting
 

Steve wrote:

Besides Practical Sailor, can anyone suggest a good "how-to" book or article
(particularly for a beginner) dealing with the application of bottom paint
and other maintenance procedures?


Sorry, but I can't think of any source that would be more current and
appropriate than Practical Sailor.

--
Jere Lull
Xan-a-Deux ('73 Tanzer 28 #4 out of Tolchester, MD)
Xan's Pages: http://members.dca.net/jerelull/X-Main.html
Our BVI FAQs (290+ pics) http://homepage.mac.com/jerelull/BVI/

Bottom painting
 

Steve wrote:

Besides Practical Sailor, can anyone suggest a good "how-to" book or article
(particularly for a beginner) dealing with the application of bottom paint
and other maintenance procedures?


Sorry, but I can't think of any source that would be more current and
appropriate than Practical Sailor.

--
Jere Lull
Xan-a-Deux ('73 Tanzer 28 #4 out of Tolchester, MD)
Xan's Pages: http://members.dca.net/jerelull/X-Main.html
Our BVI FAQs (290+ pics) http://homepage.mac.com/jerelull/BVI/

Bottom painting
 

Thanks, I checked out their site, liked what I saw, and subscribed.

Steve

"Jere Lull" wrote in message
...
Steve wrote:

Besides Practical Sailor, can anyone suggest a good "how-to" book or
article
(particularly for a beginner) dealing with the application of bottom
paint
and other maintenance procedures?


Sorry, but I can't think of any source that would be more current and
appropriate than Practical Sailor.

--
Jere Lull
Xan-a-Deux ('73 Tanzer 28 #4 out of Tolchester, MD)
Xan's Pages: http://members.dca.net/jerelull/X-Main.html
Our BVI FAQs (290+ pics) http://homepage.mac.com/jerelull/BVI/

Bottom painting
 

Thanks, I checked out their site, liked what I saw, and subscribed.

Steve

"Jere Lull" wrote in message
...
Steve wrote:

Besides Practical Sailor, can anyone suggest a good "how-to" book or
article
(particularly for a beginner) dealing with the application of bottom
paint
and other maintenance procedures?


Sorry, but I can't think of any source that would be more current and
appropriate than Practical Sailor.

--
Jere Lull
Xan-a-Deux ('73 Tanzer 28 #4 out of Tolchester, MD)
Xan's Pages: http://members.dca.net/jerelull/X-Main.html
Our BVI FAQs (290+ pics) http://homepage.mac.com/jerelull/BVI/