LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #7   Report Post  
Richard Kollmann
 
Posts: n/a
Default Yanmar 2GM won't run at top speed - not the prop

Marc Auslander wrote in message ...
I'm pretty sure the prop is NOT the problem. I've looked at it in the
water, and its clean. And its the same prop that got to full speed
last year. Should have put that on my initial list - sorry and thanks
for the reminder.
--


Loss of RPM could be an indicating problem caused by oil on the fly
wheel and tach transducer.
With the engine warm and transmission in nutral advance the throuttle
to full RPM 3400. If the engine does not reach the governed setting
the problem is in the indicating system and not the engine.
If the problem is the engine check the exhaust elbo for reduction in
opening. To check elbo remove large hose from elbo and slide two
fingers up inside. If two fingers won't fit through at the top replace
the elbo.

From the author of books on boat refrigeration
http://www.kollmann-marine.com
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Props - RPM's and Cruising Speed [email protected] General 14 June 1st 04 04:11 AM
I/O speed > Inboard speed Jim and Becky General 7 March 23rd 04 11:58 AM
Can Tow from Florida to Northeast for $$ NOYB General 106 September 24th 03 01:57 AM
Yanmar 2GM won't run at top speed Marc Auslander General 9 September 23rd 03 12:32 AM
Increasing Speed Mark General 0 July 16th 03 12:50 AM


All times are GMT +1. The time now is 10:54 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017