LinkBack Thread Tools Search this Thread Display Modes
Prev Previous Post   Next Post Next
  #3   Report Post  
posted to rec.boats.cruising
Steve Lusardi
 
Posts: n/a
Default Bad shore power

I don't want to rain on your parade here, but bad shore power is very common
and the guy next door is not causing it. The problem is that there is at
least one consumer on your distribution transformer that has a current leak
to safety ground. In an ideal world that leak should flow to earth through
the neutral to safety earth connection at the distribution transformer, but
as you are in a marina and your hull earth is a lot better than the corroded
earth rod at the transformer, the energy leak is flowing through your hull.
That is the reason for using an isolation transformer. In any case never
connect the shore point safety earth to your hull. Do exactly like your
neighbor did, connect only phase and neutral. On your boat make certain all
safety earth connections connect to your hull only. It is just as safe for
YOU, but the dock has a serious SAFETY issue. Any person touching a dock
earthed point and the water could be shocked. This is NOT code, but the
shock is significantly less on your wallet.
Steve

wrote in message
oups.com...
There is another thtread about someone with a bad shore power
connection and what to do with it. I agree, the guy has no right to
endanger others. I consider myself to be a fairly knowledgeable person
but had never had my boat in a marina and never had shore power so I
was not familiar with the dangers. When cruising, we stayed in a
marina for the first time. I decided to swim to check my prop for
fouling as I always did.
The water felt really strange, sorta tingly all over. My shaft zinc
that had just been installed a month ago was nearly gone. I was in
mask and snorkel looking at it trying to figure it out when it suddenly
occurred to me, ELECTRICITY! I swam away from the boats without
touching anything and got out of the water at the shore. Sure enough,
the guy next to me had a bizarro shore power cord with two prongs, just
regular zip cord.



 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding Simple Shore Power?? bob Cruising 18 March 17th 06 04:33 AM
Delay on timer relay for AC power supplies [email protected] Electronics 4 February 7th 06 08:25 PM
FS: Shore power cables in NY Capt. Rob Marketplace 0 January 10th 06 12:50 PM
More Breaker Panel Mess Marc Electronics 70 January 3rd 06 05:39 AM


All times are GMT +1. The time now is 06:15 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017