Wayne ,, I did seek professional help. My doctor told be to buy a sailboat!
That *******!

================================================== =====================
"Wayne.B" wrote in message
...
On Sat, 10 Jun 2006 13:10:01 GMT, "Thomas Wentworth"
wrote:

Roger ,,, did you take up the chainplate covers the 2 inches that they
will
come up and dig, clean, rebed etc?

and What did you use for sealant?
=================================

By all means take up the chainplate covers and clean.

Mask off the deck around the plates.

Put down a relatively thick (about 1/8 inch) coating of a good
polysulfide around the chainplate.

Press down lightly on the plate until you get a small amount of
"squeeze out". Do not tighten further. Remove masking tape.

Wait several days to allow the polysulfide to cure into a rubber like
state.

Tighten down the plates firmly.

Consider seeking professional help for your secrecy obsessions and
other personality quirks.

On Mon, 12 Jun 2006 16:52:31 GMT, "Thomas Wentworth"
wrote:

Wayne ,, I did seek professional help. My doctor told be to buy a sailboat!
That *******!

Now that *is* funny.

Good luck with it, boats do have a way of taking your mind off of
other things and forcing you to focus on what's important.

Thomas Wentworth wrote:
Wayne ,, I did seek professional help. My doctor told be to buy a sailboat!
That *******!




This sounds a bit like Mr. Smithers. Are you related?