Suggestion for a 4-800 lb. inexpensive mooring ?
 

I want to install a fixed mooring this summer and see that for example
mushroom anchors are expensive.

The environment is... Atlantic salt water, in a fairly well protected
cove, with 6' tides, in about 10-15' of water, virtually no traffic and
a spit serving as immediate breakwater.

Alternative suggestions to a mushroom would be appreciated.

Courtney

Suggestion for a 4-800 lb. inexpensive mooring ?
 

Courtney Thomas wrote:
I want to install a fixed mooring this summer and see that for example
mushroom anchors are expensive.

The environment is... Atlantic salt water, in a fairly well protected
cove, with 6' tides, in about 10-15' of water, virtually no traffic
and a spit serving as immediate breakwater.

Alternative suggestions to a mushroom would be appreciated.

Courtney

A Ford T-bird? Or better still, 2.

Suggestion for a 4-800 lb. inexpensive mooring ?
 

How big a boat?

An engine from a T-bird might just do. All it needs is a trip through
the car wash to get the oil and crud out of it. No big deal.

I used a truck engine to moor my SC22 for years, and the local marina
guy dropped a concrete mooring he cast in his own yard into my
beachfront for 250 bucks, delivered. He told me it needed to cure on
land for a couple of weeks to satisfy the enviromaniacs.

Terry K

Suggestion for a 4-800 lb. inexpensive mooring ?
 

If you can find them locally, a couple of scrap trainwheels work well
too. ....and they have a handy hole in the middle to run your chain
through.

Matt

Terry K wrote:
How big a boat?

An engine from a T-bird might just do. All it needs is a trip through
the car wash to get the oil and crud out of it. No big deal.

I used a truck engine to moor my SC22 for years, and the local marina
guy dropped a concrete mooring he cast in his own yard into my
beachfront for 250 bucks, delivered. He told me it needed to cure on
land for a couple of weeks to satisfy the enviromaniacs.

Terry K

Suggestion for a 4-800 lb. inexpensive mooring ?
 

If you can find them locally, a couple of scrap trainwheels work well
too. ....and they have a handy hole in the middle to run your chain
through.

Matt

Terry K wrote:
How big a boat?

An engine from a T-bird might just do. All it needs is a trip through
the car wash to get the oil and crud out of it. No big deal.

I used a truck engine to moor my SC22 for years, and the local marina
guy dropped a concrete mooring he cast in his own yard into my
beachfront for 250 bucks, delivered. He told me it needed to cure on
land for a couple of weeks to satisfy the enviromaniacs.

Terry K

Suggestion for a 4-800 lb. inexpensive mooring ?
 

On Fri, 02 Jun 2006 02:33:32 -0700, Terry K wrote:

He told me it needed to cure on land for a couple
of weeks to satisfy the enviromaniacs.

How dare he be environmentally responsible. Probably a potential
terrorist too. Someone phone the NSA...oh wait, they're already
listening...nevermind

Suggestion for a 4-800 lb. inexpensive mooring ?
 

The 3.8 litre V6 in my runabout weighs 800 lbs ... so find an old
engine that size or larger and yer good to go, er, anchor.

Suggestion for a 4-800 lb. inexpensive mooring ?
 

Train wheels are good. One wheel with half the axle is what a couple of
friends in Baddeck are using. He won't tell me where he got them.

Another option are Crusher Cones, inner or outer, made of manganese steel,
from rock crushers. About 1000 lbs I believe. Some other friends of mine
use them. I'm not sire where he got them, he's had them for years.

Perhaps Paul Hashem's Scrap Yard on Brookland St. in Sydney could help.
(902) 564-6346 They may have other suggestions.

--
Ken Heaton & Anne Tobin
Cape Breton Island, Canada
kenheaton at eastlink dot ca


wrote in message
oups.com...
If you can find them locally, a couple of scrap trainwheels work well
too. ....and they have a handy hole in the middle to run your chain
through.

Matt

Terry K wrote:
How big a boat?

An engine from a T-bird might just do. All it needs is a trip through
the car wash to get the oil and crud out of it. No big deal.

I used a truck engine to moor my SC22 for years, and the local marina
guy dropped a concrete mooring he cast in his own yard into my
beachfront for 250 bucks, delivered. He told me it needed to cure on
land for a couple of weeks to satisfy the enviromaniacs.

Terry K

Suggestion for a 4-800 lb. inexpensive mooring ?
 

Ken Heaton wrote:
Train wheels are good. One wheel with half the axle is what a couple of
friends in Baddeck are using. He won't tell me where he got them.

Another option are Crusher Cones, inner or outer, made of manganese steel,
from rock crushers. About 1000 lbs I believe. Some other friends of mine
use them. I'm not sire where he got them, he's had them for years.

Perhaps Paul Hashem's Scrap Yard on Brookland St. in Sydney could help.
(902) 564-6346 They may have other suggestions.


At the Halifax Boat Show in February, a local firm was selling concrete
anchors. Since I trailer sail I wasn't interested at the time.
I believe I still have the show program somewhere and could look if
anyone is interested.

Suggestion for a 4-800 lb. inexpensive mooring ?
 

Ken Heaton wrote:
Train wheels are good. One wheel with half the axle is what a couple of
friends in Baddeck are using. He won't tell me where he got them.

Another option are Crusher Cones, inner or outer, made of manganese steel,
from rock crushers. About 1000 lbs I believe. Some other friends of mine
use them. I'm not sire where he got them, he's had them for years.

Perhaps Paul Hashem's Scrap Yard on Brookland St. in Sydney could help.
(902) 564-6346 They may have other suggestions.

Ken,

How are these people gettin' these things in the water :-)

Thanks again,

Courtney