Home |
Search |
Today's Posts |
|
#1
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
Ric,
Welcome to Maine. We have lots of lobster traps along our coast and the proper way to deal with them is to determine two things about them every time you go out sailing. First, determine whether the lobster guys in your area use toggles or not. The toggle is a small donut shape float that holds the line off the bottom so that it does not get tangled. The line goes from the trap to the toggle vertically and then to the main buoy horizontally along the surface. The line that is used does not float so depending on the wind and current there may be a bit of a sagging of the line between the toggle and the main buoy. The second thing that you need to determine is the set of the current and the wind on the buoys. Once you have determined these two things you will know how to handle all of the buoys you encounter. You must pass close to leeward or downcurrent of a buoy or toggle or well to windward or upcurrent of the same. It is not a good idea to pass between the toggle and its main buoy because you may catch the horizontal part of the line. Although there are times when the wind and current are not too strong that you see that the horizontal line between the toggle and the main buoy sag enough that you can make it over if you go halfway between. Any way you do it, sailing in Maine is an activity to which one must pay attention. Cheers Ansley Sawyer SV Pacem out of Rockland, ME |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|