| Home |
| Search |
| Today's Posts |
|
|
|
#1
posted to rec.boats.building,rec.boats.cruising
|
|||
|
|||
|
On Wed, 30 Nov 2005 00:44:29 -0800, Evan Gatehouse
wrote: Lew did you perhaps mean the Rule 2000? I agree that it's the smallest Rule pump that isn't affected as badly by 6' of head when pumping (only drops off to about 1500 GPH) ==================================== I believe the Rule 2000 is more than 4 or 5 inches high, which is all the bilge space claimed by the original post. That's not very much room to work with in my experience, and will probably require either a small pump, or a larger pump external to the bilge with a pickup hose. Pumps with a pickup hose are considerably more expensive because of the need for valves, self priming capability, etc. The other issue that I've seen with shallow bilges is the need for a pump on both sides. Otherwise you can't get water out when the boat is heeled over. |
|
#2
posted to rec.boats.building,rec.boats.cruising
|
|||
|
|||
|
When the batteries are dead, all of the electric pumps deliver 0 gph at
best, so don't neglect a manual pump that is big enough to deal with a real leak. Edson pumps are excellent but overkill for a smaller boat. The lager Whale pumps are good. A bucket or two and a cheap plastic piston type pump are good insurance. "Wayne.B" wrote in message ... On Wed, 30 Nov 2005 00:44:29 -0800, Evan Gatehouse wrote: Lew did you perhaps mean the Rule 2000? I agree that it's the smallest Rule pump that isn't affected as badly by 6' of head when pumping (only drops off to about 1500 GPH) ==================================== I believe the Rule 2000 is more than 4 or 5 inches high, which is all the bilge space claimed by the original post. That's not very much room to work with in my experience, and will probably require either a small pump, or a larger pump external to the bilge with a pickup hose. Pumps with a pickup hose are considerably more expensive because of the need for valves, self priming capability, etc. The other issue that I've seen with shallow bilges is the need for a pump on both sides. Otherwise you can't get water out when the boat is heeled over. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Sea Ray Sundancer Bilge Question | General | |||
| Which Bilge Pump? | Boat Building | |||
| Keep Bilge Area Dry or Keep It Wet for Winterizing? | General | |||
| bilge pump question | Boat Building | |||
| Johnson 28 hp fuel pump | General | |||