BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   Cruising (https://www.boatbanter.com/cruising/)
-   -   HELP- Cleaning Buoy Rubber Marks from Hull (https://www.boatbanter.com/cruising/38510-help-cleaning-buoy-rubber-marks-hull.html)

cvj May 30th 05 06:32 PM

HELP- Cleaning Buoy Rubber Marks from Hull
 
Just returned from a one week to the San Juan Islands, where we moored at
various WA State buoys. These are basically designed with with a black
rubber tire around the flotation part - in order to "protect" the hull from
impact/bumping damage. In some cases the tire has been painted yellow for
higher visibility (I guess).

Unfortunately, the nice shine finish on our boat now has been dulled where
the tire hit the boat repeatedly during a windy night - and additionally,
some black rubber and yellow paint has been "pounded" into the gelcoat.

My question is, what product or products are recommended for cleaning and
polishing the gelcoat to get a nice shiny finish back??? I have tried a 3M
product "Clean & Shine" spray application - but it did not do the job.

Appreciate any feedback.

Thanks
Claus



John Cairns May 30th 05 07:18 PM


"cvj" wrote in message
...
Just returned from a one week to the San Juan Islands, where we moored at
various WA State buoys. These are basically designed with with a black
rubber tire around the flotation part - in order to "protect" the hull
from impact/bumping damage. In some cases the tire has been painted yellow
for higher visibility (I guess).

Unfortunately, the nice shine finish on our boat now has been dulled where
the tire hit the boat repeatedly during a windy night - and additionally,
some black rubber and yellow paint has been "pounded" into the gelcoat.

My question is, what product or products are recommended for cleaning and
polishing the gelcoat to get a nice shiny finish back??? I have tried a 3M
product "Clean & Shine" spray application - but it did not do the job.

Appreciate any feedback.

Thanks
Claus


Try the "3M Marine Fiberglass Restore and Wax" instead. Requires a bit of
elbow grease-tried it with a buffing wheel, didn't have much luck, but for a
small area it shouldn't be that much work. It is essentially a rubbing
compound with a wax. There are any number of similar products made by
different mfgs. that will probably work as well as the 3M.

John Cairns





All times are GMT +1. The time now is 01:29 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com