BoatBanter.com

BoatBanter.com (https://www.boatbanter.com/)
-   Cruising (https://www.boatbanter.com/cruising/)
-   -   how2 properly store a Westerbeke 4-108 ? (https://www.boatbanter.com/cruising/26884-how2-properly-store-westerbeke-4-108-a.html)

Courtney Thomas January 7th 05 01:07 AM

how2 properly store a Westerbeke 4-108 ?
 
Recently coming into possession of said engine, I'd like to make sure it
doesn't deteriorate while being stored in a garage for possibly a year
or more.

What should this require ?

Appreciatively,
Courtney
--
s/v Mutiny
Rhodes Bounty II
lying Oriental, NC
WDB5619


Me January 7th 05 07:50 PM

In article ,
Courtney Thomas wrote:

Recently coming into possession of said engine, I'd like to make sure it
doesn't deteriorate while being stored in a garage for possibly a year
or more.

What should this require ?

Appreciatively,
Courtney


Westerbeke 4-108??? Are you sure about the model number, and the make?
Never heard of a 4-108 that wasn't built by Perkins.

Me

Gordon January 7th 05 09:21 PM

Once bought a sailboat that had been at anchor for five years. It had a
westerbeke 4-107 in it. Bled the fuel lines, put in new batteries and
started it. Ran great!
Gordon

"Courtney Thomas" wrote in message
...
Recently coming into possession of said engine, I'd like to make sure it
doesn't deteriorate while being stored in a garage for possibly a year
or more.

What should this require ?

Appreciatively,
Courtney
--
s/v Mutiny
Rhodes Bounty II
lying Oriental, NC
WDB5619





Doug Dotson January 7th 05 10:45 PM

Keep in mind that Westerbeake doesn't actually make any engine.
They buy up various other engines in bulk and marinizes them. These
days I believe that they are Mitsubishi engines. They may have
been Perkins at some point in the past.

Doug

"Me" wrote in message
...
In article ,
Courtney Thomas wrote:

Recently coming into possession of said engine, I'd like to make sure it
doesn't deteriorate while being stored in a garage for possibly a year
or more.

What should this require ?

Appreciatively,
Courtney


Westerbeke 4-108??? Are you sure about the model number, and the make?
Never heard of a 4-108 that wasn't built by Perkins.

Me




Gordon January 8th 05 02:30 AM

4-107, 4-108 , and W40 all same o same o. Westerbeke purchased Perkins.
G
"Me" wrote in message
...
In article ,
Courtney Thomas wrote:

Recently coming into possession of said engine, I'd like to make sure it
doesn't deteriorate while being stored in a garage for possibly a year
or more.

What should this require ?

Appreciatively,
Courtney


Westerbeke 4-108??? Are you sure about the model number, and the make?
Never heard of a 4-108 that wasn't built by Perkins.

Me





Russ Barron January 8th 05 04:49 PM

I have had good results with the aerosol fogging stuff (Auto parts store
or West Marine) for storing gasoline engines, but have not used it with a
diesel.
Normally you spray it into the air intake while the engine is just running
out of the last fuel in the float bowl.
On a diesel I think I would just crank it with the fuel off to coat the
cylinders walls and valves.
Close off the intake and exhaust to keep moisture out and over fill the
crankcase with oil.
Be sure to leave yourself a note to drain the excess before you crank it
again.

On Thu, 06 Jan 2005 20:07:40 -0500, Courtney Thomas
wrote:

Recently coming into possession of said engine, I'd like to make sure it
doesn't deteriorate while being stored in a garage for possibly a year
or more.

What should this require ?

Appreciatively,
Courtney




--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

Doug Dotson January 9th 05 01:42 AM

I would be concerned that the compression of a diesel would cause
the fogging oil to combust. I've never heard of fogging a diesel, but
there might be some special product for preserving one.

Doug
s/v Callista

"Russ Barron" wrote in message
...
I have had good results with the aerosol fogging stuff (Auto parts store
or West Marine) for storing gasoline engines, but have not used it with a
diesel.
Normally you spray it into the air intake while the engine is just running
out of the last fuel in the float bowl.
On a diesel I think I would just crank it with the fuel off to coat the
cylinders walls and valves.
Close off the intake and exhaust to keep moisture out and over fill the
crankcase with oil.
Be sure to leave yourself a note to drain the excess before you crank it
again.

On Thu, 06 Jan 2005 20:07:40 -0500, Courtney Thomas
wrote:

Recently coming into possession of said engine, I'd like to make sure it
doesn't deteriorate while being stored in a garage for possibly a year
or more.

What should this require ?

Appreciatively,
Courtney




--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/




Tim January 9th 05 01:49 AM

I would say this would be a safe bet. diesel fuel in itself is an oil.
if you close of the intake, I think you'll be fine.

Tim



Close off the intake and exhaust to keep moisture out and over fill

the
crankcase with oil.
Be sure to leave yourself a note to drain the excess before you

crank it
again.

On Thu, 06 Jan 2005 20:07:40 -0500, Courtney Thomas


wrote:

Recently coming into possession of said engine, I'd like to make

sure it
doesn't deteriorate while being stored in a garage for possibly a

year
or more.

What should this require ?

Appreciatively,
Courtney




--
Using Opera's revolutionary e-mail client:

http://www.opera.com/mail/



All times are GMT +1. The time now is 04:36 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 BoatBanter.com