Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Derek Weston
 
Posts: n/a
Default

Steve wrote:
I've had a similar problem with my MD2B (100hrs). The alarm would go off
intermittently at various rpm. After replacing the sending unit (at $28) it
still happened. I added a pressure gage and found the oil pressure was
normal and it was the alarm module (Volvo OEM). They want $140 for a new one
and I am going to add one that is after market for about $40. Right now I
have the alarm module disconnected.

Steve
s/v Good Intentions



Thanks for the info gentlemen. Unfortunately, my problem isn't the
pressure switch or the alarm module. I have replaced the switch, and if
I remove it on the occassions it indicates a problem, no oil flows from
its threaded hole in the block when the engine is turned over.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
For sale: Volvo MD11C parts Bob Cruising 2 June 19th 14 01:45 PM
Volvo 4.3 fuel pump woes White Furby General 7 June 22nd 04 02:27 PM
FS: Volvo MD11C parts in St. Petersburg, FL Bob Marketplace 0 June 10th 04 03:32 PM
Volvo Question, putting MDIIB heads on a MD11C? MLapla4120 Cruising 0 April 25th 04 08:18 PM
Priming areator pump JTC General 0 August 8th 03 03:26 AM


All times are GMT +1. The time now is 12:30 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 BoatBanter.com.
The comments are property of their posters.
 

About Us

"It's about Boats"

 

Copyright © 2017