Jacklinessss
 

Getting my boat ready for a trip, I decided I need jacklines.
Besides, they will give the kids something to clip to when they insist
on sitting on the bow. I decided the ones made from flat webbing
material are not good as I have seen that material degrade very
quickly in sunlight, so I used 3/8 braid. Ajny thoughts on this?

One normally removes the jacklines when not necessary. Never had
jacklines degrade since we only deploy them when needed. Otherwise
they represent a tripping hazard.

Doug
s/v Callista

"Parallax" wrote in message
om...
Getting my boat ready for a trip, I decided I need jacklines.
Besides, they will give the kids something to clip to when they insist
on sitting on the bow. I decided the ones made from flat webbing
material are not good as I have seen that material degrade very
quickly in sunlight, so I used 3/8 braid. Ajny thoughts on this?

On 12 Oct 2004 13:42:43 -0700, (Parallax)
wrote:

Getting my boat ready for a trip, I decided I need jacklines.
Besides, they will give the kids something to clip to when they insist
on sitting on the bow. I decided the ones made from flat webbing
material are not good as I have seen that material degrade very
quickly in sunlight, so I used 3/8 braid. Ajny thoughts on this?


My own jacklines are webbing. I see no evidence of degradation. I
take them off when not needed.

I prefer webbing as line can present a hazard when stepped on.

Jack

__________________________________________________
Jack Dale
Swiftsure Sailing Academy
Director/ISPA and CYA Instructor
http://www.swiftsuresailing.com
Phone: 1 (877) 470-SAIL (toll free)
__________________________________________________

On 12 Oct 2004 13:42:43 -0700, (Parallax) wrote:

Getting my boat ready for a trip, I decided I need jacklines.
Besides, they will give the kids something to clip to when they insist
on sitting on the bow. I decided the ones made from flat webbing
material are not good as I have seen that material degrade very
quickly in sunlight, so I used 3/8 braid. Ajny thoughts on this?

Mine are white webbing. They're only set up when needed. No problems
with degredation so far.

Steve

On 12 Oct 2004 13:42:43 -0700, (Parallax)
wrote:

Getting my boat ready for a trip, I decided I need jacklines.
Besides, they will give the kids something to clip to when they insist
on sitting on the bow. I decided the ones made from flat webbing
material are not good as I have seen that material degrade very
quickly in sunlight, so I used 3/8 braid. Ajny thoughts on this?

Hmm., flat webbing: terylene/polyester? Nylon? Polypropylene?

3/8 braid. Hmmm, nylon? terylene/polyester? polypropylene?

Still, round braid shows less surface to sunlight, for the same
strength, no matter what.

Brian W

I have used both braid and webbing jacklines.

Braid are quicker to rig, cheaper, and easier to snap onto with a
double-action caribiner. However they can be hazzardous as they roll
underfoot, and always at the wrong time.

I presently use webbing as its mandatory for some offshore racing. As
they are only rigged when offshore UV degredation is not really an issue.

Incidentally, I rig a single jackstay from the starboard quarter down the
deck inside all shrouds (chainplates are on the outside of topsides) past
the forestay and back to the port quarter. A crew can go down the weather
deck, work anywhere, be foreward of the forestay for a spinacker jibe, and
then return along the new weather deck without any need to unclip and
reclip.

I also have two permanently rigged wire jackstays along each side of the
cockpit. Tethers are attached before crew come up the companionway, which
is a useful safety procedure.

Fair Winds

Graeme

Someone made the point that flat webbing presents less risk
in terms of slipping. After slipping on sheets a few times I can
relate to that. In either case, jacklines should only be deployed
when necessary so long term exposure shouldn;t be an issue.

Doug
s/v Callista

"Brian Whatcott" wrote in message
...
On 12 Oct 2004 13:42:43 -0700, (Parallax)
wrote:

Getting my boat ready for a trip, I decided I need jacklines.
Besides, they will give the kids something to clip to when they insist
on sitting on the bow. I decided the ones made from flat webbing
material are not good as I have seen that material degrade very
quickly in sunlight, so I used 3/8 braid. Ajny thoughts on this?

Hmm., flat webbing: terylene/polyester? Nylon? Polypropylene?

3/8 braid. Hmmm, nylon? terylene/polyester? polypropylene?

Still, round braid shows less surface to sunlight, for the same
strength, no matter what.

Brian W

That's overkill, but if that is your rule that is your decision.

Doug
s/v Callista

"Dave" wrote in message
...
On Tue, 12 Oct 2004 22:49:29 -0400, "Doug Dotson"
said:

In either case, jacklines should only be deployed
when necessary so long term exposure shouldn;t be an issue.

Hmm. My rule is that regardless of wind and sea conditions, nobody goes on
the foredeck underway unless he's clipped to a jack line.

On 13 Oct 2004 17:37:17 -0500, Dave wrote:

On Tue, 12 Oct 2004 22:49:29 -0400, "Doug Dotson"
said:

In either case, jacklines should only be deployed
when necessary so long term exposure shouldn;t be an issue.

Hmm. My rule is that regardless of wind and sea conditions, nobody goes on
the foredeck underway unless he's clipped to a jack line.

But the jacklines needn't be left out on deck, exposed to the sun,
unless the boat is actually being used - arrange their "installation"
so that they can be easily removed, and stowed below, when the boat is
not in use (and that may encourage you to check them for wear each
time you install them!)


--
Peter Bennett, VE7CEI
peterbb4 (at) interchange.ubc.ca
new newsgroup users info : http://vancouver-webpages.com/nnq
GPS and NMEA info: http://vancouver-webpages.com/peter
Vancouver Power Squadron: http://vancouver.powersquadron.ca

Dave wrote:

Hmm. My rule is that regardless of wind and sea conditions, nobody goes on
the foredeck underway unless he's clipped to a jack line.

ding! we have a winner folks