Home |
Search |
Today's Posts |
#6
posted to rec.boats.cruising
|
|||
|
|||
My Adler Barbour seems to make refrigerant.
In the morning, before starting, when the system is stabilized so that suction side pressure equals compression side pressure This is what I read on the suction side (i.e. it will be the same on the compressed side). Why do you assume that each side of the system is the same? You've got a pressure gauge on one side. Your problem is consistent with the high readings that you have. Do you really have any idea what the pressure is on the other side? I'd consider that the refrigerant is contaminated. Go through the cleaning process, pressure test and replace the refrigerant. If the problem comes back suspect a leak or a bad compressor. Hope it turns out to be an easy fix. Dave M. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Repairing an Adler-Barbour with electrical tape. | Cruising | |||
Adler Barbour refrig'current | Electronics | |||
Waeco/Adler Barbour refrig - strange behaviour. | Cruising | |||
Adler Barbour e-mail or web site | Cruising |