Home |
Search |
Today's Posts |
#1
posted to rec.boats.cruising
|
|||
|
|||
Paint blistering on steel hull because of ground leak
Hi,
I'm having problems with underwater paint blistering on my steel hull because of a ground leak (again)... I'll fix this leak definitely, but I'm thinking what would be the best setup to prevent damage in the future might a new leak occur. Ideally I'd like to have an isolated engine which would make my dc system completely separated from the hull (my RF ground is already isolated by capacitors). It might be easy to do if you have the money to buy a new starter motor, alternator and senders, but I'm currently not in that position. I'm now thinking of the second best option. Would it be good to put a bonding wire from engine to the hull or not? Currently there is no ground wire. That means that any ground leak takes current through the seawater to my prop/shaft or engine internals (via cooling water) and via the engine negative wire back to the battery. It eats away my expensive parts and paint. If I would ground the engine to the hull, any ground leak would follow the steel of the hull to that extra ground wire and via the engine negative back to the battery. Hereby I assume that the path via the steel is more attractive than "outside" via the sea water. I'd say this is a better situation than the current because no electrolysis takes place. Is there anyone who knows more about this topic and can comment on my dilemma? Thanks, Joost |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Steel boat paint blistering | Boat Building | |||
Steel hull - electrical ground | ASA | |||
Steel hull - electrical ground | General | |||
Steel hull - electrical ground | Boat Building | |||
Steel hull - electrical ground | Cruising |