Home |
Search |
Today's Posts |
#7
![]()
posted to rec.boats.cruising
|
|||
|
|||
![]()
"Wayne.B" wrote in message
... On Wed, 25 Feb 2009 00:51:41 +0100, "Steve Lusardi" wrote: I agee. This newsgroup has been invaded by idiots. Worse still is that the culprits do not know they are the problem. Steve "wordsmith" wrote in message news:T9CdnWAvnNQ44jnUnZ2dnUVZ_o7inZ2d@supernews. com... pity the dumbassess moved in -- poking dumbasses in the forehead, one dumbass at a time The way to fix this of course is with more on topic boating/cruising posts. I went for a cruise in the dinghy today since the trawler is hauled out for bottom painting. It was kind of interesting actually, the sort of thing we might do on an actual cruise, exploring interesting looking backwaters and enjoying an hour or two on the water. There are lots of opportunities here close to home with all of the canals and creeks branching off from the Caloosahatchie River. I've been looking at ways of making the dinghy engine more bullet proof since my little rowing adventuer in the Marquesas Keys last month. The net result has been a *large* fuel filter permanently mounted on the transom and plumbed into the fuel hose. I changed the quick connects on the tank fittings to make them compatible with each other and can now switch the fuel line from one tank to the other in seconds. That leaves me with a second fuel line and primer bulb which could be used as a backup, or to entirely bypass the filter assembly if necessary. None of this would be necessary if I confined my dinghy explorations to a shorter radius but to me half the fun of cruising is getting out and exploring the backwaters, even if they happen to be 5 miles away. I just got back from hauling my boat. Took a bunch of video and a few stills (I'll post them at some point). The bottom looked pretty good for being untouched for three years. There was still some zincs left on the strut, and the cutlass had minimal wear. -- "j" ganz @@ www.sailnow.com |