Home |
Search |
Today's Posts |
#16
![]() |
|||
|
|||
![]()
Depends on what you call a dingy.
For my small inflatable in calm water, I use Poly... easy to splice, cheap, will last for years if you get it out of the sun after use. For my tender (18' whaler)in rough water, I use 5/8" nylon with a VERY long bridle (40') and another 60' of tow line. Great stretch for rougher seas. I shorten it at the tender end if needed so that the long bridle stays intact for stabilty and a more straight pull. (Tested to 22 kts in 3-5' seas, 17 kts in 5-7' seas) When pulling into port, we do shorten it on the tow boat end and go down to towing on the non-slip side cleat. My neighbor calls a 31 jupiter his "dingy" He uses a 3/4" Multibraid with a similar setup to my Whaler. Funny thing.... the ONLY time I ever got the line caught up in the wheels was when I was towing the little guy with the floating line. (had to cut it loose in 1000+ ft of water... you tend to be VERY careful with heavy diameter nylon...) Gerald Atkin wrote: What is the best line for towing a dinghy? I have seen somewhere on the net a multifilament polypropylene dinghy tow rope that looks a lot like braided line but it is poly and floats. Assume this would be good. But can't seem to find it. If I recall it was yellow with a red thread, Jerry |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
collapsible dinghy | Boat Building | |||
Birthdate of Norman Maclean | General | |||
Skull Creek Marina complaint | Cruising | |||
What's the best dinghy for cruising and why? | Cruising | |||
Fuel pump to carbs fuel line replacement | General |