Home |
Search |
Today's Posts |
#4
![]()
posted to rec.boats.building
|
|||
|
|||
![]()
Thank you very much for your interest. I try to reply your questions:
Describe the current deck construction. It was made in 1978, probably with very high standards (Nautor's, Finland), fastened with screws and, I think, probably glued. What is the hull material? Fiberglass What is the observed faults with the deck now? Several of the screws stick out of the surface, few planks are not well fixed to the deck and water seeps under, the caulking is missing in several parts. The worst part are amidship around the chainplates. Overall I believe that the deck should be redone entirely sooner or later but I believe also that with some work I could wait, say, 3-4 years before a major work and a major investment. How thick is the teak planking? It is quite thick: probably around 12-14mm How wide are the planks? around 43mm What caulking material has been used? I don't know If you are interested, please look at the pictures posted in this page http://g24met.phys.uniroma1.it/cache Regards Daniel |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Repairs to plywood deck | Boat Building | |||
Teak Deck | Boat Building | |||
Teak deck | Cruising | |||
FS: Teak Deck Planks | Boat Building | |||
FS: Teak Deck Planks | Boat Building |