Setting solid rivets
 

Any suggestions on setting solid rivets? I have approx a dozen to drill out
and set, I have no compressor

Setting solid rivets
 

On Sat, 10 Nov 2007 09:39:54 -0500, "Nelson"
wrote:

Any suggestions on setting solid rivets? I have approx a dozen to drill out
and set, I have no compressor


1) Rent a compressor and air tool
2) Use a hammer, rivet set and bucking bar
3) Use aviation rated pull rivets and suitable pop rivet gun

Brian Whatcott Altus OK

Setting solid rivets
 

Thank you for the heads up and concidering I work at Home Depot, rental may
be the besat option, I set thousands before when I used to work at
Multi-Vans building transport bodies so I might as well do it right lol :-)

Nelson

"Brian Whatcott" wrote in message
...
On Sat, 10 Nov 2007 09:39:54 -0500, "Nelson"
wrote:

Any suggestions on setting solid rivets? I have approx a dozen to drill
out
and set, I have no compressor


1) Rent a compressor and air tool
2) Use a hammer, rivet set and bucking bar
3) Use aviation rated pull rivets and suitable pop rivet gun

Brian Whatcott Altus OK